/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2018 Cisco Systems, Inc. * * Author: Thomas Fitzsimmons * * Configuration settings for the Broadcom BCMSTB SoC family. */ #ifndef __BCMSTB_H #define __BCMSTB_H #include "version.h" #include #ifndef __ASSEMBLY__ #include #include struct bcmstb_boot_parameters { u32 r0; u32 r1; u32 r2; u32 r3; u32 sp; u32 lr; }; extern struct bcmstb_boot_parameters bcmstb_boot_parameters; extern phys_addr_t prior_stage_fdt_address; #endif /* __ASSEMBLY__ */ /* * CPU configuration. */ #define CONFIG_SKIP_LOWLEVEL_INIT /* * Memory configuration. * * The prior stage BOLT bootloader sets up memory for us. * * An example boot memory layout after loading everything is: * * 0x0000 8000 vmlinux.bin.gz * : [~31 MiB uncompressed max] * 0x01ef f000 FIT containing signed public key * : [~2 KiB in size] * 0x01f0 0000 DTB copied from prior-stage-provided region * : [~1 MiB max] * 0x0200 0000 FIT containing ramdisk and device tree * : initramfs.cpio.gz * : [~208 MiB uncompressed max, to CMA/bmem low address] * : [~80 MiB compressed max, to PSB low address] * : device tree binary * : [~60 KiB] * 0x0700 0000 Prior stage bootloader (PSB) * : * 0x0761 7000 Prior-stage-provided device tree binary (DTB) * : [~40 KiB in size] * 0x0f00 0000 Contiguous memory allocator (CMA/bmem) low address * : * 0x8010 0000 U-Boot code at ELF load address * : [~500 KiB in size, stripped] * 0xc000 0000 Top of RAM * * Setting gd->relocaddr to CONFIG_SYS_TEXT_BASE in dram_init_banksize * prevents U-Boot from relocating itself when it is run as an ELF * program by the prior stage bootloader. * * We want to keep the ramdisk and FDT in the FIT image in-place, to * accommodate stblinux's bmem and CMA regions. To accomplish this, * we set initrd_high and fdt_high to 0xffffffff, and the load and * entry addresses of the FIT ramdisk entry to 0x0. * * Overwriting the prior stage bootloader causes memory instability, * so the compressed initramfs needs to fit between the load address * and the PSB low address. In BOLT's default configuration this * limits the compressed size of the initramfs to approximately 80 * MiB. However, BOLT can be configured to allow loading larger * initramfs images, in which case this limitation is eliminated. */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x100000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. */ #define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 /* * Large kernel image bootm configuration. */ #define CONFIG_SYS_BOOTM_LEN SZ_64M /* * NS16550 configuration. */ #define V_NS16550_CLK 81000000 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* * Serial console configuration. */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200} /* * Informational display configuration. */ #define CONFIG_REVISION_TAG /* * Command configuration. */ /* * Flash configuration. */ #define CONFIG_ST_SMI #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_MACRONIX /* * Filesystem configuration. */ #define CONFIG_DOS_PARTITION /* * Environment configuration. */ #define CONFIG_ENV_OVERWRITE /* * Save the prior stage provided DTB. */ /* * Enable in-place RFS with this initrd_high setting. */ #define CONFIG_EXTRA_ENV_SETTINGS \ "fdtsaveaddr=" __stringify(CONFIG_SYS_FDT_SAVE_ADDRESS) "\0" \ "initrd_high=0xffffffff\0" \ "fdt_high=0xffffffff\0" /* * Set fdtaddr to prior stage-provided DTB in board_late_init, when * writeable environment is available. */ #endif /* __BCMSTB_H */