/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2015 Linaro * * Peter Griffin * * Configuration for HiKey 96boards CE. Parts were derived from other ARM * configurations. */ #ifndef __HIKEY_H #define __HIKEY_H #include #define CONFIG_POWER #define CONFIG_POWER_HI6553 #define CONFIG_REMAKE_ELF #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Physical Memory Map */ /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ #define PHYS_SDRAM_1 0x00000000 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ #define PHYS_SDRAM_1_SIZE 0x3EFFFFFF #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 19000000 /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xf6801000 #define GICC_BASE 0xf6802000 /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/ #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO #endif #define CONFIG_HIKEY_GPIO /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE /* Initial environment variables */ /* * Defines where the kernel and FDT will be put in RAM */ #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 1) \ func(DHCP, dhcp, na) #include #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_name=Image\0" \ "kernel_addr_r=0x00080000\0" \ "fdtfile=hi6220-hikey.dtb\0" \ "fdt_addr_r=0x02000000\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ BOOTENV /* Preserve environment on eMMC */ #define CONFIG_SYS_MMC_ENV_DEV 0 /* Use eMMC */ #define CONFIG_SYS_MMC_ENV_PART 2 /* Use Boot1 partition */ /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 64 /* max command args */ #endif /* __HIKEY_H */