summaryrefslogtreecommitdiff
path: root/board/sx1/platform.S
blob: 304812805a77a4c26c9a8b6645c5be1cf98bc8eb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
/*
 * Board specific setup info
 *
 * (C) Copyright 2003
 * Texas Instruments, <www.ti.com>
 *
 * -- Some bits of code used from rrload's head_OMAP1510.s --
 * Copyright (C) 2002 RidgeRun, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <version.h>

#if defined(CONFIG_OMAP1510)
#include <./configs/omap1510.h>
#endif

#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))


_TEXT_BASE:
	.word	TEXT_BASE	 /* sdram load addr from config.mk */

.globl platformsetup
platformsetup:

	/*
	 * Configure 1510 pins functions to match our board.
	 */
	ldr	r0, REG_PULL_DWN_CTRL_0
	ldr	r1, VAL_PULL_DWN_CTRL_0
	str	r1, [r0]
	ldr	r0, REG_PULL_DWN_CTRL_1
	ldr	r1, VAL_PULL_DWN_CTRL_1
	str	r1, [r0]
	ldr	r0, REG_PULL_DWN_CTRL_2
	ldr	r1, VAL_PULL_DWN_CTRL_2
	str	r1, [r0]
	ldr	r0, REG_PULL_DWN_CTRL_3
	ldr	r1, VAL_PULL_DWN_CTRL_3
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_4
	ldr	r1, VAL_FUNC_MUX_CTRL_4
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_5
	ldr	r1, VAL_FUNC_MUX_CTRL_5
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_6
	ldr	r1, VAL_FUNC_MUX_CTRL_6
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_7
	ldr	r1, VAL_FUNC_MUX_CTRL_7
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_8
	ldr	r1, VAL_FUNC_MUX_CTRL_8
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_9
	ldr	r1, VAL_FUNC_MUX_CTRL_9
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_A
	ldr	r1, VAL_FUNC_MUX_CTRL_A
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_B
	ldr	r1, VAL_FUNC_MUX_CTRL_B
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_C
	ldr	r1, VAL_FUNC_MUX_CTRL_C
	str	r1, [r0]
	ldr	r0, REG_FUNC_MUX_CTRL_D
	ldr	r1, VAL_FUNC_MUX_CTRL_D
	str	r1, [r0]
	ldr	r0, REG_VOLTAGE_CTRL_0
	ldr	r1, VAL_VOLTAGE_CTRL_0
	str	r1, [r0]
	ldr	r0, REG_TEST_DBG_CTRL_0
	ldr	r1, VAL_TEST_DBG_CTRL_0
	str	r1, [r0]
	ldr	r0, REG_MOD_CONF_CTRL_0
	ldr	r1, VAL_MOD_CONF_CTRL_0
	str	r1, [r0]

	/* Move to 1510 mode */
	ldr	r0, REG_COMP_MODE_CTRL_0
	ldr	r1, VAL_COMP_MODE_CTRL_0
	str	r1, [r0]

	/* Set up Traffic Ctlr*/
	ldr r0, REG_TC_IMIF_PRIO
	mov r1, #0x0
	str r1, [r0]
	ldr r0, REG_TC_EMIFS_PRIO
	str r1, [r0]
	ldr r0, REG_TC_EMIFF_PRIO
	str r1, [r0]

	ldr r0, REG_TC_EMIFS_CONFIG
	ldr r1, [r0]
	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
	str r1, [r0]	    /* EMIFS GlB Configuration. (value 0x12 most likely) */

	ldr r0, _GPIO_PIN_CONTROL_REG
	ldrh r1,[r0]
	orr r1, r1, #0x0001 /* M_PCM_SYNC */
	orr r1, r1, #0x4000 /* IPC_ACTIVE */
	orr r1, r1, #0x0002 /* A_IRDA_OFF */
	orr r1, r1, #0x0800 /* A_SWITCH	  */
	orr r1, r1, #0x8000 /* A_USB_ON	  */
	strh r1,[r0]

	ldr r0, _GPIO_DIR_CONTROL_REG
	ldrh r1,[r0]
	bic r1, r1, #0x0001 /* M_PCM_SYNC */
	bic r1, r1, #0x4000 /* IPC_ACTIVE */
	bic r1, r1, #0x0002 /* A_IRDA_OFF */
	bic r1, r1, #0x0800 /* A_SWITCH	  */
	bic r1, r1, #0x8000 /* A_USB_ON	  */
	strh r1,[r0]

	ldr r0, _GPIO_DATA_OUTPUT_REG
	ldrh r1,[r0]
	bic r1, r1, #0x0001 /* M_PCM_SYNC */
	orr r1, r1, #0x4000 /* IPC_ACTIVE */
	orr r1, r1, #0x0002 /* A_IRDA_OFF */
	bic r1, r1, #0x0800 /* A_SWITCH	  */
	bic r1, r1, #0x8000 /* A_USB_ON	  */
	strh r1,[r0]

	/* Setup some clock domains */
	ldr r1, =OMAP1510_CLKS
	ldr r0, REG_ARM_IDLECT2
	strh r1, [r0]  /* CLKM, Clock domain control. */

	mov r1, #0x01  /* PER_EN bit */
	ldr r0, REG_ARM_RSTCT2
	strh r1, [r0]  /* CLKM; Peripheral reset. */

	/* Set CLKM to Sync-Scalable  */
	/* I supposidly need to enable the dsp clock before switching */
	mov r1, #0x1000
	ldr r0, REG_ARM_SYSST
	strh r1, [r0]
	mov r0, #0x400
1:
	subs r0, r0, #0x1   /* wait for any bubbles to finish */
	bne 1b

	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
	ldr r0, REG_ARM_CKCTL
	strh r1, [r0]

	/* setup DPLL 1 */
	ldr r1, VAL_DPLL1_CTL
	ldr r0, REG_DPLL1_CTL
	strh r1, [r0]
	ands r1, r1, #0x10  /* Check if PLL is enabled. */
	beq lock_end	    /* Do not look for lock if BYPASS selected */
2:
	ldrh r1, [r0]
	ands r1, r1, #0x01  /* Check the LOCK bit. */
	beq 2b		    /* ...loop until bit goes hi. */
lock_end:

	/* Set memory timings corresponding to the new clock speed */

	/* Check execution location to determine current execution location
	 * and branch to appropriate initialization code.
	 */
	mov r0, #0x10000000		    /* Load physical SDRAM base. */
	mov r1, pc			    /* Get current execution location. */
	cmp r1, r0			    /* Compare. */
	bge skip_sdram			    /* Skip over EMIF-fast initialization if running from SDRAM. */

	/*
	 * Delay for SDRAM initialization.
	 */
	mov r3, #0x1800			       /* value should be checked */
3:
	subs r3, r3, #0x1		      /* Decrement count */
	bne 3b

	/*
	 * Set SDRAM control values. Disable refresh before MRS command.
	 */
	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
	bic r3, r0, #0xC		    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
	orr r3, r3, #0x8000000		    /* (BIT27) Disable CLK when Power down or Self-Refresh */
	orr r3, r3, #0x4000000		    /* BIT26 Power Down Enable */
	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
	str r3, [r2]			    /* Store the passed value with AR disabled. */

	ldr r1, VAL_TC_EMIFF_MRS	    /* get MRS value */
	ldr r2, REG_TC_EMIFF_MRS	    /* Point to MRS register. */
	str r1, [r2]			    /* Store the passed value.*/

	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
	str r0, [r2]			    /* Store the passed value. */

	/*
	 * Delay for SDRAM initialization.
	 */
	mov r3, #0x1800
4:
	subs r3, r3, #1			    /* Decrement count. */
	bne 4b

skip_sdram:

	/* slow interface */
	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
	ldr r0, REG_TC_EMIFS_CS0_CONFIG
	str r1, [r0] /* Chip Select 0 */
	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
	ldr r0, REG_TC_EMIFS_CS1_CONFIG
	str r1, [r0] /* Chip Select 1 */
	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
	ldr r0, REG_TC_EMIFS_CS2_CONFIG
	str r1, [r0] /* Chip Select 2 */
	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
	ldr r0, REG_TC_EMIFS_CS3_CONFIG
	str r1, [r0] /* Chip Select 3 */

	/* back to arch calling code */
	mov	pc, lr

/* the literal pools origin */
	.ltorg

/* OMAP configuration registers */
REG_FUNC_MUX_CTRL_0:		/* 32 bits */
	.word 0xfffe1000
REG_FUNC_MUX_CTRL_1:		/* 32 bits */
	.word 0xfffe1004
REG_FUNC_MUX_CTRL_2:		/* 32 bits */
	.word 0xfffe1008
REG_COMP_MODE_CTRL_0:		/* 32 bits */
	.word 0xfffe100c
REG_FUNC_MUX_CTRL_3:		/* 32 bits */
	.word 0xfffe1010
REG_FUNC_MUX_CTRL_4:		/* 32 bits */
	.word 0xfffe1014
REG_FUNC_MUX_CTRL_5:		/* 32 bits */
	.word 0xfffe1018
REG_FUNC_MUX_CTRL_6:		/* 32 bits */
	.word 0xfffe101c
REG_FUNC_MUX_CTRL_7:		/* 32 bits */
	.word 0xfffe1020
REG_FUNC_MUX_CTRL_8:		/* 32 bits */
	.word 0xfffe1024
REG_FUNC_MUX_CTRL_9:		/* 32 bits */
	.word 0xfffe1028
REG_FUNC_MUX_CTRL_A:		/* 32 bits */
	.word 0xfffe102C
REG_FUNC_MUX_CTRL_B:		/* 32 bits */
	.word 0xfffe1030
REG_FUNC_MUX_CTRL_C:		/* 32 bits */
	.word 0xfffe1034
REG_FUNC_MUX_CTRL_D:		/* 32 bits */
	.word 0xfffe1038
REG_PULL_DWN_CTRL_0:		/* 32 bits */
	.word 0xfffe1040
REG_PULL_DWN_CTRL_1:		/* 32 bits */
	.word 0xfffe1044
REG_PULL_DWN_CTRL_2:		/* 32 bits */
	.word 0xfffe1048
REG_PULL_DWN_CTRL_3:		/* 32 bits */
	.word 0xfffe104c
REG_VOLTAGE_CTRL_0:		/* 32 bits */
	.word 0xfffe1060
REG_TEST_DBG_CTRL_0:		/* 32 bits */
	.word 0xfffe1070
REG_MOD_CONF_CTRL_0:		/* 32 bits */
	.word 0xfffe1080
REG_TC_IMIF_PRIO:		/* 32 bits */
	.word 0xfffecc00
REG_TC_EMIFS_PRIO:		/* 32 bits */
	.word 0xfffecc04
REG_TC_EMIFF_PRIO:		/* 32 bits */
	.word 0xfffecc08
REG_TC_EMIFS_CONFIG:		/* 32 bits */
	.word 0xfffecc0c
REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
	.word 0xfffecc10
REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
	.word 0xfffecc14
REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
	.word 0xfffecc18
REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
	.word 0xfffecc1c
REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
	.word 0xfffecc20
REG_TC_EMIFF_MRS:		/* 32 bits */
	.word 0xfffecc24
/* MPU clock/reset/power mode control registers */
REG_ARM_CKCTL:			/* 16 bits */
	.word 0xfffece00
REG_ARM_IDLECT2:		/* 16 bits */
	.word 0xfffece08
REG_ARM_RSTCT2:			/* 16 bits */
	.word 0xfffece14
REG_ARM_SYSST:			/* 16 bits */
	.word 0xfffece18
/* DPLL control registers */
REG_DPLL1_CTL:			/* 16 bits */
	.word 0xfffecf00
/* identification code register */
REG_IDCODE:			/* 32 bits */
	.word 0xfffed404

/* SX1 specific */
_GPIO_PIN_CONTROL_REG:
	.word GPIO_PIN_CONTROL_REG
_GPIO_DIR_CONTROL_REG:
	.word GPIO_DIR_CONTROL_REG
_GPIO_DATA_OUTPUT_REG:
	.word GPIO_DATA_OUTPUT_REG

VAL_COMP_MODE_CTRL_0:
	.word 0x0000eaef
VAL_FUNC_MUX_CTRL_4:
	.word 0x00000000
VAL_FUNC_MUX_CTRL_5:
	.word 0x00000000
VAL_FUNC_MUX_CTRL_6:
	.word 0x00000001
VAL_FUNC_MUX_CTRL_7:
	.word 0x00001000
VAL_FUNC_MUX_CTRL_8:
	.word 0x00001240       /*[Knoller]  Value of Symbian Image Wing B2*/
VAL_FUNC_MUX_CTRL_9:
	.word 0x00201008
VAL_FUNC_MUX_CTRL_A:
	.word 0x00001000
VAL_FUNC_MUX_CTRL_B:
	.word 0x00000000
VAL_FUNC_MUX_CTRL_C:
	.word 0x09008001       /*[Knoller]  Value of Symbian Image Wing B2*/
VAL_FUNC_MUX_CTRL_D:
	.word 0x00000000
VAL_PULL_DWN_CTRL_0:
	.word 0xfffeffff
VAL_PULL_DWN_CTRL_1:
	.word 0xd1ffffec
VAL_PULL_DWN_CTRL_2:
	.word 0xffa80c5b
VAL_PULL_DWN_CTRL_3:
	.word 0xffffc0fe
VAL_VOLTAGE_CTRL_0:
	.word 0x00000007
VAL_TEST_DBG_CTRL_0:
	/* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
	 * says to write a 7.  Don't know what the right thing is to do, so
	 * I'm leaving it at 7 since that's what was already here.
	 */
	.word 0x00000007
VAL_MOD_CONF_CTRL_0:
	.word 0x0da20000       /*[Knoller]  Value of Symbian Image Wing B2*/

VAL_ARM_CKCTL:
	.word 0x010D

VAL_DPLL1_CTL:
	.word 0x3A33   /*[Hertle] Value of Symbian Image*/

VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
	.word 0x00001149

VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
	.word 0x00004158

VAL_TC_EMIFS_CS0_CONFIG:
	.word 0x00213090       /*[Knoller]  Value of Symbian Image Wing B2*/

VAL_TC_EMIFS_CS1_CONFIG:
	.word 0x00215070       /*[Knoller]  Value of Symbian Image Wing B2*/

VAL_TC_EMIFS_CS2_CONFIG:
	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/

VAL_TC_EMIFS_CS3_CONFIG:
	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/

VAL_TC_EMIFF_SDRAM_CONFIG:
	.word 0x0105f0b4       /*[Knoller]  Value of Symbian Image Wing B2*/


VAL_TC_EMIFF_MRS:
	.word 0x00000027       /*[Knoller]  Value of Symbian Image Wing B2*/