path: root/common/cmd_vboot_twostop.c

/*
 * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 */

#include <common.h>
#include <command.h>
#include <fdt_decode.h>
#include <lcd.h>
#include <malloc.h>
#include <chromeos/boot_kernel.h>
#include <chromeos/common.h>
#include <chromeos/crossystem_data.h>
#include <chromeos/cros_gpio.h>
#include <chromeos/fdt_decode.h>
#include <chromeos/firmware_storage.h>
#include <chromeos/gbb.h>
#include <chromeos/hasher_state.h>
#include <chromeos/memory_wipe.h>
#include <chromeos/power_management.h>
#include <usb.h>

#ifdef CONFIG_VIDEO_TEGRA
/* for tegra_lcd_check_next_stage() */
#include <asm/arch-tegra/dc.h>
#endif

#include <gbb_header.h> /* for GoogleBinaryBlockHeader */
#include <tss_constants.h>
#include <vboot_api.h>

#ifdef CONFIG_SYS_COREBOOT
#include <asm/ic/coreboot/sysinfo.h>
#endif
#ifndef CACHE_LINE_SIZE
#define CACHE_LINE_SIZE __BIGGEST_ALIGNMENT__
#endif

#define PREFIX "vboot_twostop: "

/*
 * The current design of twostop firmware, if we use x86 firmware design as a
 * metaphor, twostop firmware has:
 * - One bootstub that select one of the main firmware
 * - One read-only main firmware which can do recovery and normal/dev boot
 * - Two readwrite main firmware which are virtually identical to x86 readwrite
 *   firmware, that is, they only have code path to normal/dev boot
 *
 * The readwrite main firmware does not reinitialize itself (this differs to the
 * prior twostop design). As a consequence, a fixed protocol between bootstub
 * and readwrite main firmware must be defined, specifying which hardware need
 * or need not be initialized, what parameters are passed from bootstub to main
 * firmware, and etc.
 *
 * The parameters are:
 * - VbSharedData
 * - GBB
 * - Crossystem data
 * Note that the format of the parameters must be versioned so that newer
 * readwrite firmware can still work with old bootstub.
 */

/*
 * TODO The current readwrite firmware is a full-fledged U-Boot. As a
 * consequence, it will reinitialize most of the device that the bootstub
 * already initialized. We should eliminate such reinitialization not just
 * because it is slow, but also because it could be problematic.
 *
 * Given that, we must define a clear protocol specifying which device are
 * initialized by the bootstub, and which are by the readwrite firmware.
 */

DECLARE_GLOBAL_DATA_PTR;

/* The margin to keep extra stack region that not to be wiped. */
#define STACK_MARGIN		1024


/*
 * Combine VbSelectFirmware_t with VbError_t for this one file.
 * TODO(wfrichar): Clean this up, either by changing vboot or refactoring here.
 */
enum {
	/* VbSelectFirmware_t */
	TWOSTOP_SELECT_FIRMWARE_RECOVERY =    VB_SELECT_FIRMWARE_RECOVERY,
	TWOSTOP_SELECT_FIRMWARE_A        =    VB_SELECT_FIRMWARE_A,
	TWOSTOP_SELECT_FIRMWARE_B        =    VB_SELECT_FIRMWARE_B,
	TWOSTOP_SELECT_FIRMWARE_READONLY =    VB_SELECT_FIRMWARE_READONLY,
	/* More choices */
	TWOSTOP_SELECT_ERROR,
	TWOSTOP_SELECT_POWER_OFF,
	TWOSTOP_SELECT_COMMAND_LINE
};


#ifdef VBOOT_DEBUG
#define MY_ENUM_TO_STR(a) #a
static const char *
str_selection(uint32_t selection)
{
	switch (selection) {
	case TWOSTOP_SELECT_FIRMWARE_RECOVERY:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_FIRMWARE_RECOVERY);
		break;
	case TWOSTOP_SELECT_FIRMWARE_A:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_FIRMWARE_A);
		break;
	case TWOSTOP_SELECT_FIRMWARE_B:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_FIRMWARE_B);
		break;
	case TWOSTOP_SELECT_FIRMWARE_READONLY:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_FIRMWARE_READONLY);
		break;
	case TWOSTOP_SELECT_ERROR:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_ERROR);
		break;
	case TWOSTOP_SELECT_POWER_OFF:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_POWER_OFF);
		break;
	case TWOSTOP_SELECT_COMMAND_LINE:
		return MY_ENUM_TO_STR(TWOSTOP_SELECT_COMMAND_LINE);
		break;
	}
	return "<UNKNOWN>";
}
#undef MY_ENUM_TO_STR
#endif /* VBOOT_DEBUG */

/*
 * Implement a weak default function for boards that optionally
 * need to initialize the USB stack to detect their keyboard.
 */
int __board_use_usb_keyboard(void)
{
	/* default: no USB keyboard as primary input */
	return 0;
}
int board_use_usb_keyboard(int boot_mode)
	__attribute__((weak, alias("__board_use_usb_keyboard")));

/*
 * Check if two stop boot secuence can be interrupted. If configured - use the
 * device tree contents to determine it. Some other means (like checking the
 * environment) could be added later.
 *
 * Returns VB_INIT_FLAG_RO_NORMAL_SUPPORT if interruption is allowed or 0
 * otherwise.
 */
static int check_ro_normal_support(void)
{
	int rc = 0;
#ifdef CONFIG_OF_CONTROL
	if (fdt_decode_chromeos_config_has_prop(gd->blob, "twostop-optional"))
		rc = VB_INIT_FLAG_RO_NORMAL_SUPPORT;
#endif
	VBDEBUG(PREFIX "%stwostop-optional\n", rc ? "" : "not ");
	return rc;
}

static int
twostop_init_cparams(struct twostop_fmap *fmap, void *gbb,
		     void *vb_shared_data, VbCommonParams *cparams)
{
	cparams->gbb_data = gbb;
	cparams->gbb_size = fmap->readonly.gbb.length;
#ifdef CONFIG_SYS_COREBOOT
	cparams->shared_data_blob = lib_sysinfo.vdat_addr;
	cparams->shared_data_size = lib_sysinfo.vdat_size;
#else
	cparams->shared_data_blob = vb_shared_data;
	cparams->shared_data_size = VB_SHARED_DATA_REC_SIZE;
#endif
#define P(format, field) \
	VBDEBUG(PREFIX "- %-20s: " format "\n", #field, cparams->field)

	VBDEBUG(PREFIX "cparams:\n");
	P("%p",   gbb_data);
	P("%08x", gbb_size);
	P("%p",   shared_data_blob);
	P("%08x", shared_data_size);

#undef P

	return 0;
}

#if defined(CONFIG_OF_CONTROL) && defined(CONFIG_TEGRA2)

extern uint8_t _start;
extern uint8_t __bss_end__;

static void setup_arch_unused_memory(memory_wipe_t *wipe,
	crossystem_data_t *cdata, VbCommonParams *cparams)
{
	struct fdt_memory config, ramoops;

	if (fdt_decode_memory(gd->blob, "/memory", &config))
		VbExError(PREFIX "FDT decode memory section error\n");

	memory_wipe_add(wipe, config.start, config.end);

	/* Excludes kcrashmem if in FDT */
	if (fdt_decode_memory(gd->blob, "/ramoops", &ramoops))
		VBDEBUG(PREFIX "RAMOOPS not contained within FDT\n");
	else
		memory_wipe_sub(wipe, ramoops.start, ramoops.end);

	/* Excludes the LP0 vector. */
	memory_wipe_sub(wipe,
			(uintptr_t)TEGRA_LP0_ADDR,
			(uintptr_t)(TEGRA_LP0_ADDR + TEGRA_LP0_SIZE));

#ifdef CONFIG_LCD
	{
		int fb_size, lcd_line_length;

		/* Excludes the frame buffer. */
		fb_size = lcd_get_size(&lcd_line_length);
		memory_wipe_sub(wipe,
				(uintptr_t)gd->fb_base,
				(uintptr_t)gd->fb_base + fb_size);
	}
#endif
}

#elif defined(CONFIG_SYS_COREBOOT)

extern uint8_t __text_start;
extern uint8_t __bss_end;

static void setup_arch_unused_memory(memory_wipe_t *wipe,
	crossystem_data_t *cdata, VbCommonParams *cparams)
{
	int i;

	/* Add ranges that describe RAM. */
	for (i = 0; i < lib_sysinfo.n_memranges; i++) {
		struct memrange *range = &lib_sysinfo.memrange[i];
		if (range->type == CB_MEM_RAM) {
			memory_wipe_add(wipe, range->base,
				range->base + range->size);
		}
	}
	/*
	 * Remove ranges that don't. These should take precedence, so they're
	 * done last and in their own loop.
	 */
	for (i = 0; i < lib_sysinfo.n_memranges; i++) {
		struct memrange *range = &lib_sysinfo.memrange[i];
		if (range->type != CB_MEM_RAM) {
			memory_wipe_sub(wipe, range->base,
				range->base + range->size);
		}
	}
}

#else

static void setup_arch_unused_memory(memory_wipe_t *wipe,
	crossystem_data_t *cdata, VbCommonParams *cparams)
{
	VBDEBUG(PREFIX "No memory wipe performed!");
}

#endif

static uintptr_t get_current_sp(void)
{
	uintptr_t addr;

	addr = (uintptr_t)&addr;
	return addr;
}

static void wipe_unused_memory(crossystem_data_t *cdata,
	VbCommonParams *cparams)
{
	memory_wipe_t wipe;

	memory_wipe_init(&wipe);
	setup_arch_unused_memory(&wipe, cdata, cparams);

	/* Exclude relocated u-boot structures. */
	memory_wipe_sub(&wipe, get_current_sp() - STACK_MARGIN,
#if defined(CONFIG_SYS_COREBOOT)
			gd->relocaddr + (&__bss_end - &__text_start)
#elif defined(CONFIG_OF_CONTROL) && defined(CONFIG_TEGRA2)
			gd->relocaddr + (&__bss_end__ - &_start)
#endif
			);

	/* Exclude the shared data between bootstub and main firmware. */
	memory_wipe_sub(&wipe, (uintptr_t)cdata,
			(uintptr_t)cdata + sizeof(*cdata));
	memory_wipe_sub(&wipe, (uintptr_t)cparams->gbb_data,
			(uintptr_t)cparams->gbb_data + cparams->gbb_size);

	memory_wipe_execute(&wipe);
}

static VbError_t
twostop_init_vboot_library(firmware_storage_t *file, void *gbb,
			   uint32_t gbb_offset, size_t gbb_size,
			   crossystem_data_t *cdata, VbCommonParams *cparams)
{
	VbError_t err;
	VbInitParams iparams;

	memset(&iparams, 0, sizeof(iparams));
	iparams.flags = check_ro_normal_support();

	if (cdata->boot_write_protect_switch)
		iparams.flags |= VB_INIT_FLAG_WP_ENABLED;
	if (cdata->boot_recovery_switch)
		iparams.flags |= VB_INIT_FLAG_REC_BUTTON_PRESSED;
	if (cdata->boot_developer_switch)
		iparams.flags |= VB_INIT_FLAG_DEV_SWITCH_ON;
	VBDEBUG(PREFIX "iparams.flags: %08x\n", iparams.flags);

	if ((err = VbInit(cparams, &iparams))) {
		VBDEBUG(PREFIX "VbInit: %u\n", err);
		return err;
	}

#ifdef CONFIG_VIDEO_TEGRA
	tegra_lcd_check_next_stage(gd->blob, 0);
#endif
	VBDEBUG(PREFIX "iparams.out_flags: %08x\n", iparams.out_flags);

	if (iparams.out_flags & VB_INIT_OUT_CLEAR_RAM)
		wipe_unused_memory(cdata, cparams);

	/* Load required information of GBB */
	if (iparams.out_flags & VB_INIT_OUT_ENABLE_DISPLAY)
		if (gbb_read_bmp_block(gbb, file, gbb_offset, gbb_size))
			return VBERROR_INVALID_GBB;
	if (cdata->boot_developer_switch ||
			iparams.out_flags & VB_INIT_OUT_ENABLE_RECOVERY) {
		if (gbb_read_recovery_key(gbb, file, gbb_offset, gbb_size))
			return VBERROR_INVALID_GBB;
	}

	return VBERROR_SUCCESS;
}

static uint32_t
twostop_make_selection(struct twostop_fmap *fmap, firmware_storage_t *file,
		       VbCommonParams *cparams, void **fw_blob_ptr,
		       uint32_t *fw_size_ptr)
{
	uint32_t selection = TWOSTOP_SELECT_ERROR;
	VbError_t err;
	uint32_t vlength;
	VbSelectFirmwareParams fparams;
	hasher_state_t s;

	memset(&fparams, '\0', sizeof(fparams));

	vlength = fmap->readwrite_a.vblock.length;
	assert(vlength == fmap->readwrite_b.vblock.length);

	fparams.verification_size_A = fparams.verification_size_B = vlength;

#ifndef CONFIG_HARDWARE_MAPPED_SPI
	fparams.verification_block_A = memalign(CACHE_LINE_SIZE, vlength);
	if (!fparams.verification_block_A) {
		VBDEBUG(PREFIX "failed to allocate vblock A\n");
		goto out;
	}
	fparams.verification_block_B = memalign(CACHE_LINE_SIZE, vlength);
	if (!fparams.verification_block_B) {
		VBDEBUG(PREFIX "failed to allocate vblock B\n");
		goto out;
	}
#endif
	if (file->read(file, fmap->readwrite_a.vblock.offset, vlength,
				BT_EXTRA fparams.verification_block_A)) {
		VBDEBUG(PREFIX "fail to read vblock A\n");
		goto out;
	}
	if (file->read(file, fmap->readwrite_b.vblock.offset, vlength,
				BT_EXTRA fparams.verification_block_B)) {
		VBDEBUG(PREFIX "fail to read vblock B\n");
		goto out;
	}

	s.fw[0].vblock = fparams.verification_block_A;
	s.fw[1].vblock = fparams.verification_block_B;

	s.fw[0].offset = fmap->readwrite_a.boot.offset;
	s.fw[1].offset = fmap->readwrite_b.boot.offset;

	s.fw[0].size = fmap->readwrite_a.boot.length;
	s.fw[1].size = fmap->readwrite_b.boot.length;

#ifndef CONFIG_HARDWARE_MAPPED_SPI
	s.fw[0].cache = memalign(CACHE_LINE_SIZE, s.fw[0].size);
	if (!s.fw[0].cache) {
		VBDEBUG(PREFIX "failed to allocate cache A\n");
		goto out;
	}
	s.fw[1].cache = memalign(CACHE_LINE_SIZE, s.fw[1].size);
	if (!s.fw[1].cache) {
		VBDEBUG(PREFIX "failed to allocate cache B\n");
		goto out;
	}
#endif

	s.file = file;
	cparams->caller_context = &s;

	if ((err = VbSelectFirmware(cparams, &fparams))) {
		VBDEBUG(PREFIX "VbSelectFirmware: %d\n", err);
		goto out;
	}

	VBDEBUG(PREFIX "selected_firmware: %d\n", fparams.selected_firmware);
	selection = fparams.selected_firmware;

out:

	FREE_IF_NEEDED(fparams.verification_block_A);
	FREE_IF_NEEDED(fparams.verification_block_B);

	if (selection == VB_SELECT_FIRMWARE_A) {
		*fw_blob_ptr = s.fw[0].cache;
		*fw_size_ptr = s.fw[0].size;
		FREE_IF_NEEDED(s.fw[1].cache);
	} else if (selection == VB_SELECT_FIRMWARE_B) {
		*fw_blob_ptr = s.fw[1].cache;
		*fw_size_ptr = s.fw[1].size;
		FREE_IF_NEEDED(s.fw[0].cache);
	}

	return selection;
}

static uint32_t
twostop_select_and_set_main_firmware(struct twostop_fmap *fmap,
				     firmware_storage_t *file, void *gbb,
				     size_t gbb_size, crossystem_data_t *cdata,
				     void *vb_shared_data, int *boot_mode,
				     void **fw_blob_ptr, uint32_t *fw_size_ptr)
{
	uint32_t selection;
	uint32_t id_offset = 0, id_length = 0;
	int firmware_type;
#ifndef CONFIG_HARDWARE_MAPPED_SPI
	uint8_t firmware_id[ID_LEN];
#else
	uint8_t *firmware_id;
#endif
	VbCommonParams cparams;

	bootstage_mark(BOOTSTAGE_VBOOT_SELECT_AND_SET,
		       "twostop_select_and_set_main_firmware");
	if (twostop_init_cparams(fmap, gbb, vb_shared_data, &cparams)) {
		VBDEBUG(PREFIX "failed to init cparams\n");
		return TWOSTOP_SELECT_ERROR;
	}

	if (twostop_init_vboot_library(file, gbb, fmap->readonly.gbb.offset,
				       gbb_size, cdata, &cparams)
			!= VBERROR_SUCCESS) {
		VBDEBUG(PREFIX "failed to init vboot library\n");
		return TWOSTOP_SELECT_ERROR;
	}

	selection = twostop_make_selection(fmap, file, &cparams,
			fw_blob_ptr, fw_size_ptr);

	VBDEBUG(PREFIX "selection: %s\n", str_selection(selection));

	if (selection == TWOSTOP_SELECT_ERROR)
		return TWOSTOP_SELECT_ERROR;

	switch(selection) {
	case VB_SELECT_FIRMWARE_RECOVERY:
	case VB_SELECT_FIRMWARE_READONLY:
		id_offset = fmap->readonly.firmware_id.offset;
		id_length = fmap->readonly.firmware_id.length;
		break;
	case VB_SELECT_FIRMWARE_A:
		id_offset = fmap->readwrite_a.firmware_id.offset;
		id_length = fmap->readwrite_a.firmware_id.length;
		break;
	case VB_SELECT_FIRMWARE_B:
		id_offset = fmap->readwrite_b.firmware_id.offset;
		id_length = fmap->readwrite_b.firmware_id.length;
		break;
	default:
		VBDEBUG(PREFIX "impossible selection value: %d\n", selection);
		assert(0);
	}

	if (file->read(file, id_offset,
				MIN(sizeof(firmware_id), id_length),
				BT_EXTRA firmware_id)) {
		VBDEBUG(PREFIX "failed to read active firmware id\n");
		firmware_id[0] = '\0';
	}

	if (selection == VB_SELECT_FIRMWARE_RECOVERY)
		firmware_type = FIRMWARE_TYPE_RECOVERY;
	else if (cdata->boot_developer_switch)
		firmware_type = FIRMWARE_TYPE_DEVELOPER;
	else
		firmware_type = FIRMWARE_TYPE_NORMAL;

	*boot_mode = firmware_type;

	VBDEBUG(PREFIX "active main firmware type : %d\n", firmware_type);
	VBDEBUG(PREFIX "active main firmware id   : \"%s\"\n", firmware_id);

	if (crossystem_data_set_main_firmware(cdata,
				firmware_type, firmware_id)) {
		VBDEBUG(PREFIX "failed to set active main firmware\n");
		return TWOSTOP_SELECT_ERROR;
	}

	return selection;
}

static uint32_t
twostop_jump(crossystem_data_t *cdata, void *fw_blob, uint32_t fw_size)
{
	VBDEBUG(PREFIX "jump to readwrite main firmware at %#x, size %#x\n",
			CONFIG_SYS_TEXT_BASE, fw_size);

	/*
	 * TODO: This version of U-Boot must be loaded at a fixed location. It
	 * could be problematic if newer version U-Boot changed this address.
	 */
	memmove((void *)CONFIG_SYS_TEXT_BASE, fw_blob, fw_size);

	/*
	 * TODO We need to reach the Point of Unification here, but I am not
	 * sure whether the following function call flushes L2 cache or not. If
	 * it does, we should avoid that.
	 */
	cleanup_before_linux();

	((void(*)(void))CONFIG_SYS_TEXT_BASE)();

	/* It is an error if readwrite firmware returns */
	return TWOSTOP_SELECT_ERROR;
}

static int
twostop_init(struct twostop_fmap *fmap, firmware_storage_t *file,
	     void **gbbp, size_t gbb_size, crossystem_data_t *cdata,
	     void *vb_shared_data)
{
	cros_gpio_t wpsw, recsw, devsw;
	GoogleBinaryBlockHeader *gbbh;
	uint8_t hardware_id[ID_LEN];
#ifndef CONFIG_HARDWARE_MAPPED_SPI
	uint8_t  readonly_firmware_id[ID_LEN];
#else
	uint8_t *readonly_firmware_id;
#endif
	int ret = -1;
	void *gbb;

	bootstage_mark(BOOTSTAGE_VBOOT_TWOSTOP_INIT, "twostop_init");
	if (cros_gpio_fetch(CROS_GPIO_WPSW, &wpsw) ||
			cros_gpio_fetch(CROS_GPIO_RECSW, &recsw) ||
			cros_gpio_fetch(CROS_GPIO_DEVSW, &devsw)) {
		VBDEBUG(PREFIX "failed to fetch gpio\n");
		return -1;
	}
	cros_gpio_dump(&wpsw);
	cros_gpio_dump(&recsw);
	cros_gpio_dump(&devsw);

	if (fdt_decode_twostop_fmap(gd->blob, fmap)) {
		VBDEBUG(PREFIX "failed to decode fmap\n");
		return -1;
	}
	dump_fmap(fmap);

	/* We revert the decision of using firmware_storage_open_twostop() */
	if (firmware_storage_open_spi(file)) {
		VBDEBUG(PREFIX "failed to open firmware storage\n");
		return -1;
	}

	/* Read read-only firmware ID */
	if (file->read(file, fmap->readonly.firmware_id.offset,
				MIN(sizeof(readonly_firmware_id),
					fmap->readonly.firmware_id.length),
				BT_EXTRA readonly_firmware_id)) {
		VBDEBUG(PREFIX "failed to read firmware ID\n");
		readonly_firmware_id[0] = '\0';
	}
	VBDEBUG(PREFIX "read-only firmware id: \"%s\"\n", readonly_firmware_id);

	/* Load basic parts of gbb blob */
#ifdef CONFIG_HARDWARE_MAPPED_SPI
	if (gbb_init(gbbp, file, fmap->readonly.gbb.offset, gbb_size)) {
		VBDEBUG(PREFIX "failed to read gbb\n");
		goto out;
	}
	gbb = *gbbp;
#else
	gbb = *gbbp;
	if (gbb_init(gbb, file, fmap->readonly.gbb.offset, gbb_size)) {
		VBDEBUG(PREFIX "failed to read gbb\n");
		goto out;
	}
#endif

	gbbh = (GoogleBinaryBlockHeader *)gbb;
	memcpy(hardware_id, gbb + gbbh->hwid_offset,
			MIN(sizeof(hardware_id), gbbh->hwid_size));
	VBDEBUG(PREFIX "hardware id: \"%s\"\n", hardware_id);

	/* Initialize crossystem data */
	/*
	 * TODO There is no readwrite EC firmware on our current ARM boards. But
	 * we should have a mechanism to probe (or acquire this information from
	 * the device tree) whether the active EC firmware is R/O or R/W.
	 */
	if (crossystem_data_init(cdata,
				&wpsw, &recsw, &devsw,
				fmap->readonly.fmap.offset,
				ACTIVE_EC_FIRMWARE_RO,
				hardware_id,
				readonly_firmware_id)) {
		VBDEBUG(PREFIX "failed to init crossystem data\n");
		goto out;
	}

	ret = 0;
#ifdef CONFIG_VIDEO_TEGRA
	tegra_lcd_check_next_stage(gd->blob, 0);
#endif

out:
	if (ret)
		file->close(file);

	return ret;
}

static uint32_t
twostop_main_firmware(struct twostop_fmap *fmap, void *gbb,
		      crossystem_data_t *cdata, void *vb_shared_data)
{
	VbError_t err;
	VbSelectAndLoadKernelParams kparams;
	VbCommonParams cparams;
	size_t size;

	bootstage_mark(BOOTSTAGE_VBOOT_TWOSTOP_MAIN_FIRMWARE,
		       "twostop_main_firmware");
	if (twostop_init_cparams(fmap, gbb, vb_shared_data, &cparams)) {
		VBDEBUG(PREFIX "failed to init cparams\n");
		return TWOSTOP_SELECT_ERROR;
	}

	kparams.kernel_buffer = fdt_decode_chromeos_alloc_region(gd->blob,
		"kernel", &size);
	kparams.kernel_buffer_size = size;

	VBDEBUG(PREFIX "kparams:\n");
	VBDEBUG(PREFIX "- kernel_buffer:      : %p\n", kparams.kernel_buffer);
	VBDEBUG(PREFIX "- kernel_buffer_size: : %08x\n",
			kparams.kernel_buffer_size);

	if ((err = VbSelectAndLoadKernel(&cparams, &kparams))) {
		VBDEBUG(PREFIX "VbSelectAndLoadKernel: %d\n", err);
		switch (err) {
		case VBERROR_SHUTDOWN_REQUESTED:
			return TWOSTOP_SELECT_POWER_OFF;
			break;
		case VBERROR_BIOS_SHELL_REQUESTED:
			return TWOSTOP_SELECT_COMMAND_LINE;
		}
		return TWOSTOP_SELECT_ERROR;
	}

	VBDEBUG(PREFIX "kparams:\n");
	VBDEBUG(PREFIX "- disk_handle:        : %p\n", kparams.disk_handle);
	VBDEBUG(PREFIX "- partition_number:   : %08x\n",
			kparams.partition_number);
	VBDEBUG(PREFIX "- bootloader_address: : %08llx\n",
			kparams.bootloader_address);
	VBDEBUG(PREFIX "- bootloader_size:    : %08x\n",
			kparams.bootloader_size);
	VBDEBUG(PREFIX "- partition_guid:     :");
#ifdef VBOOT_DEBUG
	int i;
	for (i = 0; i < 16; i++)
		VBDEBUG(" %02x", kparams.partition_guid[i]);
	VBDEBUG("\n");
#endif /* VBOOT_DEBUG */

	crossystem_data_dump(cdata);
	boot_kernel(&kparams, cdata);

	/* It is an error if boot_kenel returns */
	return TWOSTOP_SELECT_ERROR;
}

/**
 * Get address of the cdata (and gbb, if not mapping SPI flash directly), and
 * optionally verify them.
 *
 * @param gbb returns pointer to GBB when SPI flash is not mapped directly.
 *            Contains pointer to gbb otherwise.
 * @param cdata		returns pointer to crossystem data
 * @param verify	1 to verify data, 0 to skip this step
 * @return 0 if ok, -1 on error
 */
static int setup_gbb_and_cdata(void **gbb, size_t *gbb_size,
			       crossystem_data_t **cdata, int verify)
{
	size_t size;

#ifndef CONFIG_HARDWARE_MAPPED_SPI
	*gbb = fdt_decode_chromeos_alloc_region(gd->blob,
			"google-binary-block", gbb_size);

	if (!*gbb) {
		VBDEBUG(PREFIX "google-binary-block missing "
			"from fdt, or malloc failed\n");
		return -1;
	}

#endif
	*cdata = fdt_decode_chromeos_alloc_region(gd->blob, "cros-system-data",
						 &size);
	if (!*cdata) {
		VBDEBUG(PREFIX "cros-system-data missing "
				"from fdt, or malloc failed\n");
		return -1;
	}

	/*
	 * TODO(clchiou): readwrite firmware should check version of the data
	 * blobs
	 */
	if (verify && crossystem_data_check_integrity(*cdata)) {
		VBDEBUG(PREFIX "invalid crossystem data\n");
		return -1;
	}

	if (verify && gbb_check_integrity(*gbb)) {
		VBDEBUG(PREFIX "invalid gbb at %p\n", *gbb);
		return -1;
	}
	return 0;
}

static uint32_t
twostop_boot(void)
{
	struct twostop_fmap fmap;
	firmware_storage_t file;
	crossystem_data_t *cdata;
	void *gbb;
	size_t gbb_size = 0;
	void *vb_shared_data;
	void *fw_blob = NULL;
	uint32_t fw_size = 0;
	uint32_t selection;
	int boot_mode = FIRMWARE_TYPE_NORMAL;

	if (setup_gbb_and_cdata(&gbb, &gbb_size, &cdata, 0))
		return TWOSTOP_SELECT_ERROR;

	vb_shared_data = cdata->vb_shared_data;
	if (twostop_init(&fmap, &file, &gbb, gbb_size, cdata,
			 vb_shared_data)) {
		VBDEBUG(PREFIX "failed to init twostop boot\n");
		return TWOSTOP_SELECT_ERROR;
	}

	selection = twostop_select_and_set_main_firmware(&fmap, &file,
			gbb, gbb_size, cdata, vb_shared_data,
			&boot_mode, &fw_blob, &fw_size);
	VBDEBUG(PREFIX "selection of bootstub: %s\n", str_selection(selection));

	file.close(&file); /* We don't care even if it fails */

	/* Don't we bother to free(fw_blob) if there was an error? */
	if (selection == TWOSTOP_SELECT_ERROR)
		return TWOSTOP_SELECT_ERROR;

	if (selection == VB_SELECT_FIRMWARE_A ||
			selection == VB_SELECT_FIRMWARE_B)
		return twostop_jump(cdata, fw_blob, fw_size);

	assert(selection == VB_SELECT_FIRMWARE_READONLY ||
			selection == VB_SELECT_FIRMWARE_RECOVERY);

	/*
	 * TODO: Now, load drivers for rec/normal/dev main firmware.
	 */
#ifdef CONFIG_USB_KEYBOARD
	if (board_use_usb_keyboard(boot_mode)) {
		int cnt;
		/* enumerate USB devices to find the keyboard */
		cnt = usb_init();
		if (cnt >= 0)
			drv_usb_kbd_init();
	}
#endif

	VBDEBUG(PREFIX "boot_mode: %d\n", boot_mode);

	selection = twostop_main_firmware(&fmap, gbb, cdata, vb_shared_data);
	VBDEBUG(PREFIX "selection of read-only main firmware: %s\n",
			str_selection(selection));

	if (selection != TWOSTOP_SELECT_COMMAND_LINE)
		return selection;

	/*
	 * TODO: Now, load all other drivers, such as networking, as we are
	 * returning back to the command line.
	 */

	return TWOSTOP_SELECT_COMMAND_LINE;
}

static uint32_t
twostop_readwrite_main_firmware(void)
{
	struct twostop_fmap fmap;
	crossystem_data_t *cdata;
	void *gbb;
	size_t gbb_size;

	if (fdt_decode_twostop_fmap(gd->blob, &fmap)) {
		VBDEBUG(PREFIX "failed to decode fmap\n");
		return TWOSTOP_SELECT_ERROR;
	}
	dump_fmap(&fmap);

#ifdef CONFIG_HARDWARE_MAPPED_SPI
	gbb = (void *) (fmap.readonly.gbb.offset + fmap.flash_base);
#endif
	if (setup_gbb_and_cdata(&gbb, &gbb_size, &cdata, 1))
		return TWOSTOP_SELECT_ERROR;

	/*
	 * VbSelectAndLoadKernel() assumes the TPM interface has already been
	 * initialized by VbSelectFirmware(). Since we haven't called
	 * VbSelectFirmware() in the readwrite firmware, we need to explicitly
	 * initialize the TPM interface. Note that this only re-initializes the
	 * interface, not the TPM itself.
	 */
	if (VbExTpmInit() != TPM_SUCCESS) {
		VBDEBUG(PREFIX "failed to init tpm interface\n");
		return TWOSTOP_SELECT_ERROR;
	}

#ifdef CONFIG_USB_KEYBOARD
	if (board_use_usb_keyboard(FIRMWARE_TYPE_NORMAL)) {
		int cnt;
		/* enumerate USB devices to find the keyboard */
		cnt = usb_init();
		if (cnt >= 0)
			drv_usb_kbd_init();
	}
#endif

	return twostop_main_firmware(&fmap, gbb, cdata, cdata->vb_shared_data);
}

static int
do_vboot_twostop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	uint32_t selection;

	bootstage_mark(BOOTSTAGE_VBOOT_TWOSTOP, "do_vboot_twostop");
	/*
	 * TODO: We should clear screen later if we load graphics optionally.
	 * In normal mode, we don't need to load graphics driver and clear
	 * screen.
	 */
	display_clear();

	/*
	 * A processor reset jumps to the reset entry point (which is the
	 * read-only firmware), otherwise we have entered U-Boot from a
	 * software jump.
	 *
	 * Note: If a read-only firmware is loaded to memory not because of a
	 * processor reset, this instance of read-only firmware should go to the
	 * readwrite firmware code path.
	 */
	if (is_processor_reset())
		selection = twostop_boot();
	else
		selection = twostop_readwrite_main_firmware();

	VBDEBUG(PREFIX "selection of main firmware: %s\n",
			str_selection(selection));

	if (selection == TWOSTOP_SELECT_COMMAND_LINE)
		return 0;

	if (selection == TWOSTOP_SELECT_POWER_OFF)
		power_off();

	assert(selection == TWOSTOP_SELECT_ERROR);

	cold_reboot();
	return 0;
}

U_BOOT_CMD(vboot_twostop, 1, 1, do_vboot_twostop,
		"verified boot twostop firmware", NULL);