summaryrefslogtreecommitdiff
path: root/doc/README.m54418twr
blob: 0ca74aa114c4b1b2bddae39895fa3c0c57e3c4fd (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
Freescale MCF54418TWR ColdFire Development Board
================================================

TsiChung Liew(Tsi-Chung.Liew@freescale.com)
Created Mar 22, 2012
===========================================


Changed files:
==============

- board/freescale/m54418twr/m54418twr.c	Dram setup
- board/freescale/m54418twr/Makefile	Makefile
- board/freescale/m54418twr/config.mk	config make
- board/freescale/m54418twr/u-boot.lds	Linker description
- board/freescale/m54418twr/sbf_dram_init.S
                                        DDR/SDRAM initialization

- arch/m68k/cpu/mcf5445x/cpu.c		cpu specific code
- arch/m68k/cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
- arch/m68k/cpu/mcf5445x/interrupts.c	cpu specific interrupt support
- arch/m68k/cpu/mcf5445x/speed.c	system, pci, flexbus, and cpu clock
- arch/m68k/cpu/mcf5445x/Makefile	Makefile
- arch/m68k/cpu/mcf5445x/config.mk	config make
- arch/m68k/cpu/mcf5445x/start.S	start up assembly code

- doc/README.m54418twr			This readme file

- drivers/net/mcffec.c			ColdFire common FEC driver
- drivers/net/mcfmii.c			ColdFire common MII driver
- drivers/serial/mcfuart.c		ColdFire common UART driver

- arch/m68k/include/asm/bitops.h	Bit operation function export
- arch/m68k/include/asm/byteorder.h	Byte order functions
- arch/m68k/include/asm/fec.h		FEC structure and definition
- arch/m68k/include/asm/global_data.h	Global data structure
- arch/m68k/include/asm/immap.h		ColdFire specific header file and driver macros
- arch/m68k/include/asm/immap_5441x.h	mcf5441x specific header file
- arch/m68k/include/asm/io.h		io functions
- arch/m68k/include/asm/m5441x.h	mcf5441x specific header file
- arch/m68k/include/asm/posix_types.h	Posix
- arch/m68k/include/asm/processor.h	header file
- arch/m68k/include/asm/ptrace.h	Exception structure
- arch/m68k/include/asm/rtc.h		Realtime clock header file
- arch/m68k/include/asm/string.h	String function export
- arch/m68k/include/asm/timer.h		Timer structure and definition
- arch/m68k/include/asm/types.h		Data types definition
- arch/m68k/include/asm/uart.h		Uart structure and definition
- arch/m68k/include/asm/u-boot.h	u-boot structure

- include/configs/M54418TWR.h		Board specific configuration file

- arch/m68k/lib/board.c			board init function
- arch/m68k/lib/cache.c
- arch/m68k/lib/interrupts.c		Coldfire common interrupt functions
- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
- arch/m68k/lib/traps.c			Exception init code

1 MCF5441x specific Options/Settings
====================================
1.1 pre-loader is no longer suppoer in thie coldfire family

1.2 Configuration settings for M54418TWR Development Board
CONFIG_MCF5441x			-- define for all MCF5441x CPUs
CONFIG_M54418			-- define for all Freescale MCF54418 CPUs

CONFIG_MCFUART			-- define to use common CF Uart driver
CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
CONFIG_BAUDRATE			-- define UART baudrate

CONFIG_MCFFEC			-- define to use common CF FEC driver
CONFIG_MII			-- enable to use MII driver
CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
CONFIG_SYS_FEC1_MIIBASE		-- Set FEC0 MII base register
MCFFEC_TOUT_LOOP		-- set FEC timeout loop
CONFIG_HAS_ETH1			-- define to enable second FEC in u-boot

CONFIG_MCFTMR			-- define to use DMA timer

CONFIG_SYS_IMMR			-- define for MBAR offset

CONFIG_EXTRA_CLOCK		-- Enable extra clock such as vco, flexbus, pci, etc

CONFIG_SYS_MBAR			-- define MBAR offset

CONFIG_MONITOR_IS_IN_RAM 	-- Not support

CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM

CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register

CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base

2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
2.1. System memory map:
	MRAM:		0x00000000-0x0003FFFF (256KB)
	DDR:		0x40000000-0x47FFFFFF (128MB)
	SRAM:		0x80000000-0x8000FFFF (64KB)
	IP:		0xE0000000-0xFFFFFFFF (512MB)

3. COMPILATION
==============
3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF version)
from codesourcery.com was used. Download it from:
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html

3.2 Compilation
   export CROSS_COMPILE=cross-compile-prefix
   cd u-boot
   make distclean
   make M54418TWR_config, or			- default to spi serial flash boot, 50Mhz input clock
   make M54418TWR_nand_mii_config, or		- default to nand flash boot, mii mode, 25Mhz input clock
   make M54418TWR_nand_rmii_config, or		- default to nand flash boot, rmii mode, 50Mhz input clock
   make M54418TWR_nand_rmii_lowfreq_config, or	- default to nand flash boot, rmii mode, 50Mhz input clock
   make M54418TWR_serial_mii_config, or		- default to spi serial flash boot, 25Mhz input clock
   make M54418TWR_serial_rmii_config, or	- default to spi serial flash boot, 50Mhz input clock
   make

4. SCREEN DUMP
==============
4.1 M54418TWR Development board
    Boot from NAND flash (NOTE: May not show exactly the same)

U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54)

CPU:   Freescale MCF54418 (Mask:a3 Version:1)
       CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz
       INP CLK 50 MHz VCO CLK 500 MHz
Board: Freescale MCF54418 Tower System
SPI:   ready
DRAM:  128 MiB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   FEC0, FEC1
-> pri
baudrate=115200
bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k
ernel)ro,-(jffs2) console=ttyS0,115200
bootdelay=2
eth1addr=00:e0:0c:bc:e5:61
ethact=FEC0
ethaddr=00:e0:0c:bc:e5:60
fileaddr=40010000
filesize=27354
gatewayip=192.168.1.1
hostname=M54418TWR
inpclk=50000000
ipaddr=192.168.1.2
load=tftp ${loadaddr} ${u-boot};
loadaddr=0x40010000
mem=129024k
netdev=eth0
netmask=255.255.255.0
prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save
serverip=192.168.1.1
stderr=serial
stdin=serial
stdout=serial
u-boot=u-boot.bin
upd=run load; run prog

Environment size: 653/131068 bytes
-> bdinfo
memstart    = 0x40000000
memsize     = 0x08000000
flashstart  = 0x00000000
flashsize   = 0x00000000
flashoffset = 0x00000000
sramstart   = 0x80000000
sramsize    = 0x00010000
mbar        = 0xFC000000
cpufreq     =    250 MHz
busfreq     =    125 MHz
flbfreq     =    125 MHz
inpfreq     =     50 MHz
vcofreq     =    500 MHz
ethaddr     = 00:e0:0c:bc:e5:60
eth1addr    = 00:e0:0c:bc:e5:61
ip_addr     = 192.168.1.2
baudrate    = 115200 bps
-> help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dcache  - enable or disable data cache
dhcp    - boot image via network using DHCP/TFTP protocol
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
exit    - exit script
false   - do nothing, unsuccessfully
go      - start application at address 'addr'
help    - print command description/usage
icache  - enable or disable instruction cache
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loop    - infinite loop on address range
md      - memory display
mdio    - MDIO utility commands
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nb_update- Nand boot update  program
nboot   - boot from NAND device
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reginfo - print register information
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sf      - SPI flash sub-system
showvar - print local hushshell variables
sleep   - delay execution for some time
source  - run script from memory
sspi    - SPI utility command
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
version - print monitor, compiler and linker version