recipes-images: images: Use ext4 by default for iMX6 modules

Use ext4 by default for iMX6 modules.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>

3 files changed, 8 insertions, 8 deletions

diff --git a/recipes-images/images/files/library/imx6/flash_blk.scr b/recipes-images/images/files/library/imx6/flash_blk.scr
index 2a905ac..6df7797 100644
--- a/recipes-images/images/files/library/imx6/flash_blk.scr
+++ b/recipes-images/images/files/library/imx6/flash_blk.scr
@@ -17,7 +17,7 @@ setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loa
 setenv migrate_uboot_old 'setenv uboot_hwpart 0; run update_spl && run update_uboot_bin; setenv uboot_hwpart 1'
 setenv migrate_uboot 'run update_spl && run update_uboot_bin && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
 
-setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext3-${filenum} || setenv filesize 0; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
+setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext4-${filenum} || setenv filesize 0; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
 
 setenv update_spl 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/SPL && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 2 ${blkcnt}'
 setenv update_uboot_bin 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx-spl && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 8a ${blkcnt}'
diff --git a/recipes-images/images/files/library/imx6/flash_eth.scr b/recipes-images/images/files/library/imx6/flash_eth.scr
index 4866e5c..75ee572 100644
--- a/recipes-images/images/files/library/imx6/flash_eth.scr
+++ b/recipes-images/images/files/library/imx6/flash_eth.scr
@@ -15,7 +15,7 @@ setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loa
 setenv migrate_uboot_old 'setenv uboot_hwpart 0; run update_spl && run update_uboot_bin; setenv uboot_hwpart 1'
 setenv migrate_uboot 'run update_spl && run update_uboot_bin && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
 
-setenv cp_file_chunk 'tftpboot ${loadaddr} ${board_name}/root.ext3-${filenum} || setenv filesize 0; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
+setenv cp_file_chunk 'tftpboot ${loadaddr} ${board_name}/root.ext4-${filenum} || setenv filesize 0; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
 
 setenv update_spl 'tftpboot ${loadaddr} ${board_name}/SPL && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 2 ${blkcnt}'
 setenv update_uboot_bin 'tftpboot ${loadaddr} ${board_name}/u-boot.imx-spl && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 8a ${blkcnt}'
diff --git a/recipes-images/images/files/library/imx6/update.sh b/recipes-images/images/files/library/imx6/update.sh
index 5d9384f..fb9510d 100755
--- a/recipes-images/images/files/library/imx6/update.sh
+++ b/recipes-images/images/files/library/imx6/update.sh
@@ -131,7 +131,7 @@ case "$MODTYPE" in
 	"apalis-imx6")
 		# assumed minimal eMMC size [in sectors of 512]
 		EMMC_SIZE=$(expr 1024 \* 3500 \* 2)
-		IMAGEFILE=root.ext3
+		IMAGEFILE=root.ext4
 		KERNEL_DEVICETREE="imx6q-apalis-eval.dtb imx6q-apalis_v1_0-eval.dtb \
                                   imx6q-apalis-ixora.dtb imx6q-apalis_v1_0-ixora.dtb \
                                   imx6q-apalis-ixora-v1.1.dtb"
@@ -141,7 +141,7 @@ case "$MODTYPE" in
 	"colibri-imx6")
 		# assumed minimal eMMC size [in sectors of 512]
 		EMMC_SIZE=$(expr 1024 \* 3500 \* 2)
-		IMAGEFILE=root.ext3
+		IMAGEFILE=root.ext4
 		KERNEL_DEVICETREE="imx6dl-colibri-eval-v3.dtb imx6dl-colibri-cam-eval-v3.dtb imx6dl-colibri-aster.dtb"
 		LOCPATH="imx_flash"
 		OUT_DIR="$OUT_DIR/colibri_imx6"
@@ -184,7 +184,7 @@ fi
 MCOPY=`command -v mcopy` || { echo >&2 "Program mcopy not available.  Aborting."; exit 1; }
 PARTED=`command -v parted` || PARTED=`sudo -s command -v parted` || { echo >&2 "Program parted not available.  Aborting."; exit 1; }
 MKFSVFAT=`command -v mkfs.fat` || MKFSVFAT=`sudo -s command -v mkfs.fat` || { echo >&2 "Program mkfs.fat not available.  Aborting."; exit 1; }
-MKFSEXT3=`command -v mkfs.ext3` || MKFSEXT3=`sudo -s command -v mkfs.ext3` || { echo >&2 "Program mkfs.ext3 not available.  Aborting."; exit 1; }
+MKFSEXT4=`command -v mkfs.ext4` || MKFSEXT4=`sudo -s command -v mkfs.ext4` || { echo >&2 "Program mkfs.ext4 not available.  Aborting."; exit 1; }
 dd --help >/dev/null 2>&1 || { echo >&2 "Program dd not available.  Aborting."; exit 1; }
 
 #Install trap to write a sensible message in case any of the commands below
@@ -247,7 +247,7 @@ ${PARTED} -s ${BINARIES}/mbr.bin mklabel msdos
 ${PARTED} -a none -s ${BINARIES}/mbr.bin unit s mkpart primary fat32 ${BOOT_START} $(expr ${ROOTFS_START} - 1 )
 # the partition spans to the end of the disk, even though the fs size will be smaller
 # on the target the fs is then grown to the full size
-${PARTED} -a none -s ${BINARIES}/mbr.bin unit s mkpart primary ext2 ${ROOTFS_START} $(expr ${EMMC_SIZE} \- ${ROOTFS_START} \- 1)
+${PARTED} -a none -s ${BINARIES}/mbr.bin unit s mkpart primary ext4 ${ROOTFS_START} $(expr ${EMMC_SIZE} \- ${ROOTFS_START} \- 1)
 ${PARTED} -s ${BINARIES}/mbr.bin unit s print 
 # get the size of the VFAT partition
 BOOT_BLOCKS=$(LC_ALL=C ${PARTED} -s ${BINARIES}/mbr.bin unit b print \
@@ -293,7 +293,7 @@ NUMBER_OF_FILES=`sudo find ${ROOTFSPATH} | wc -l`
 EXT_SIZE=`sudo du -DsB1 ${ROOTFSPATH} | awk -v min=$MIN_PARTITION_FREE_SIZE -v f=${NUMBER_OF_FILES} \
 		'{rootfs_size=$1+f*512;rootfs_size=int(rootfs_size/1024/985); print (rootfs_size+min) }'`
 rm -f ${BINARIES}/${IMAGEFILE}
-sudo $LOCPATH/genext3fs.sh -d rootfs -b ${EXT_SIZE} ${BINARIES}/${IMAGEFILE} || exit 1
+sudo $LOCPATH/genext4fs.sh -d rootfs -b ${EXT_SIZE} ${BINARIES}/${IMAGEFILE} || exit 1
 
 
 #copy to $OUT_DIR
@@ -304,7 +304,7 @@ sudo cp ${BINARIES}/fwd_eth.img "$OUT_DIR/../flash_eth.img"
 sudo cp ${BINARIES}/fwd_mmc.img "$OUT_DIR/../flash_mmc.img"
 
 if [ "$SPLIT" -ge 1 ] ; then
-sudo split -a 3 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=100 ${BINARIES}/${IMAGEFILE} "$OUT_DIR/root.ext3-"
+sudo split -a 3 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=100 ${BINARIES}/${IMAGEFILE} "$OUT_DIR/root.ext4-"
 fi
 
 #cleanup intermediate files