1 files changed, 45 insertions, 0 deletions
diff --git a/recipes-images/images/files/apalis-imx6/apalis-imx6_bin/flash_blk.scr b/recipes-images/images/files/apalis-imx6/apalis-imx6_bin/flash_blk.scr
new file mode 100644
index 0000000..398c4de
--- /dev/null
+++ b/recipes-images/images/files/apalis-imx6/apalis-imx6_bin/flash_blk.scr
@@ -0,0 +1,45 @@
+test -n ${interface} || setenv interface mmc
+test -n ${drive} || setenv drive 1
+
+setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
+setenv set_nextpos 'setexpr filepos ${filepos} + ${filesize}; setexpr blkstart ${blkstart} + ${blkcnt}'
+
+setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
+setenv check_2 'setenv conf_blk_offset 0xfff; mmc read ${loadaddr} ${conf_blk_offset} 1'
+setenv check_3 'setenv conf_blk_offset 0x7ff; mmc read ${loadaddr} ${conf_blk_offset} 1'
+setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mw.l ${kernel_addr_r} 0x002d1400; mmc dev 0 1; run check_1 || run check_2 || run check_3; cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3'
+
+setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loadaddr} 0x500 1 && cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
+
+setenv migrate_uboot_old 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 2 ${blkcnt}'
+setenv migrate_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
+
+setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext3 ${filesize} ${filepos}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
+
+setenv update_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
+setenv update_uboot_it 'setenv module_type -it; run update_uboot'
+
+setenv update_kernel 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}'
+
+setenv update_fdt 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/${fdt_file} && fatwrite mmc 0:1 ${loadaddr} ${fdt_file} ${filesize}'
+
+setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 ${loadaddr} ${board_name}/configblock.bin && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
+
+setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
+setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
+#do it in chunks of 64M to fit into DDR RAM of the smallest module
+setenv update_3 'setenv filesize 4000000; setenv filepos 0; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextpos; done; true'
+
+setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
+setenv echo_migrate-it echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_it\" to complete update"
+setenv migrate 'run migrate_configblock; run update_latest; reset'
+setenv migrate_it 'setenv module_type -it; run migrate'
+setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate${module_type}'
+setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate${module_type}'
+
+setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
+setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
+setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
+setenv update_it 'setenv module_type -it; run update'
+
+echo 'enter "run update" or "run update_it" to update the entire module'