diff options
author | Stefan Agner <stefan@agner.ch> | 2017-03-14 13:59:28 -0700 |
---|---|---|
committer | Max Krummenacher <max.krummenacher@toradex.com> | 2017-03-15 18:35:51 +0100 |
commit | 39ac0033f2345ce7b5d8ca4439192407dacb2355 (patch) | |
tree | 51dc588baa63d31bc406388885f62c1cae068fa3 /drivers/usb | |
parent | 13f2767f31803754aa883f298737aff866f04628 (diff) | |
parent | d9e0350d2575a20ee7783427da9bd6b6107eb983 (diff) |
Merge tag 'v4.1.39' into toradex_vf_4.1-nexttoradex_vf_4.1
Linux 4.1.39
Diffstat (limited to 'drivers/usb')
50 files changed, 594 insertions, 235 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 92937c14f818..ebcf40c2f12b 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -939,6 +939,15 @@ static int isr_setup_status_phase(struct ci_hdrc *ci) int retval; struct ci_hw_ep *hwep; + /* + * Unexpected USB controller behavior, caused by bad signal integrity + * or ground reference problems, can lead to isr_setup_status_phase + * being called with ci->status equal to NULL. + * If this situation occurs, you should review your USB hardware design. + */ + if (WARN_ON_ONCE(!ci->status)) + return -EPIPE; + hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; ci->status->context = ci; ci->status->complete = isr_setup_status_complete; @@ -1578,8 +1587,11 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) { struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); - /* Data+ pullup controlled by OTG state machine in OTG fsm mode */ - if (ci_otg_is_fsm_mode(ci)) + /* + * Data+ pullup controlled by OTG state machine in OTG fsm mode; + * and don't touch Data+ in host mode for dual role config. + */ + if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST) return 0; pm_runtime_get_sync(&ci->gadget.dev); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 41dcefe67b43..84532dc93801 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1720,6 +1720,7 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ .driver_info = QUIRK_CONTROL_LINE_STATE, }, { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ + { USB_DEVICE(0x2184, 0x0036) }, /* GW Instek AFG-125 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, /* Motorola H24 HSPA module: */ diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 894894f2ff93..70af0804465c 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -178,14 +178,26 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, if (ifp->desc.bNumEndpoints >= num_ep) goto skip_to_next_endpoint_or_interface_descriptor; + /* Check for duplicate endpoint addresses */ + for (i = 0; i < ifp->desc.bNumEndpoints; ++i) { + if (ifp->endpoint[i].desc.bEndpointAddress == + d->bEndpointAddress) { + dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + } + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; ++ifp->desc.bNumEndpoints; memcpy(&endpoint->desc, d, n); INIT_LIST_HEAD(&endpoint->urb_list); - /* Fix up bInterval values outside the legal range. Use 32 ms if no - * proper value can be guessed. */ + /* + * Fix up bInterval values outside the legal range. + * Use 10 or 8 ms if no proper value can be guessed. + */ i = 0; /* i = min, j = max, n = default */ j = 255; if (usb_endpoint_xfer_int(d)) { @@ -193,13 +205,15 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, switch (to_usb_device(ddev)->speed) { case USB_SPEED_SUPER: case USB_SPEED_HIGH: - /* Many device manufacturers are using full-speed + /* + * Many device manufacturers are using full-speed * bInterval values in high-speed interrupt endpoint - * descriptors. Try to fix those and fall back to a - * 32 ms default value otherwise. */ + * descriptors. Try to fix those and fall back to an + * 8-ms default value otherwise. + */ n = fls(d->bInterval*8); if (n == 0) - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ j = 16; /* @@ -214,10 +228,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, } break; default: /* USB_SPEED_FULL or _LOW */ - /* For low-speed, 10 ms is the official minimum. + /* + * For low-speed, 10 ms is the official minimum. * But some "overclocked" devices might want faster - * polling so we'll allow it. */ - n = 32; + * polling so we'll allow it. + */ + n = 10; break; } } else if (usb_endpoint_xfer_isoc(d)) { @@ -225,10 +241,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, j = 16; switch (to_usb_device(ddev)->speed) { case USB_SPEED_HIGH: - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ break; default: /* USB_SPEED_FULL */ - n = 6; /* 32 ms = 2^(6-1) frames */ + n = 4; /* 8 ms = 2^(4-1) frames */ break; } } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 986abde07683..3d46b0bae75c 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1526,11 +1526,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb as->urb->start_frame = uurb->start_frame; as->urb->number_of_packets = number_of_packets; as->urb->stream_id = stream_id; - if (uurb->type == USBDEVFS_URB_TYPE_ISO || - ps->dev->speed == USB_SPEED_HIGH) - as->urb->interval = 1 << min(15, ep->desc.bInterval - 1); - else - as->urb->interval = ep->desc.bInterval; + + if (ep->desc.bInterval) { + if (uurb->type == USBDEVFS_URB_TYPE_ISO || + ps->dev->speed == USB_SPEED_HIGH || + ps->dev->speed >= USB_SPEED_SUPER) + as->urb->interval = 1 << + min(15, ep->desc.bInterval - 1); + else + as->urb->interval = ep->desc.bInterval; + } + as->urb->context = as; as->urb->complete = async_completed; for (totlen = u = 0; u < number_of_packets; u++) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c98f78b0bf11..7602eceb5403 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -101,6 +101,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev); static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -882,82 +884,28 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1, } /* - * If USB 3.0 ports are placed into the Disabled state, they will no longer - * detect any device connects or disconnects. This is generally not what the - * USB core wants, since it expects a disabled port to produce a port status - * change event when a new device connects. - * - * Instead, set the link state to Disabled, wait for the link to settle into - * that state, clear any change bits, and then put the port into the RxDetect - * state. + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices */ -static int hub_usb3_port_disable(struct usb_hub *hub, int port1) -{ - int ret; - int total_time; - u16 portchange, portstatus; - - if (!hub_is_superspeed(hub->hdev)) - return -EINVAL; - - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - /* - * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI - * Controller [1022:7814] will have spurious result making the following - * usb 3.0 device hotplugging route to the 2.0 root hub and recognized - * as high-speed device if we set the usb 3.0 port link state to - * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we - * check the state here to avoid the bug. - */ - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_RX_DETECT) { - dev_dbg(&hub->ports[port1 - 1]->dev, - "Not disabling port; link state is RxDetect\n"); - return ret; - } - - ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); - if (ret) - return ret; - - /* Wait for the link to enter the disabled state. */ - for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_SS_DISABLED) - break; - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - break; - msleep(HUB_DEBOUNCE_STEP); - } - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - dev_warn(&hub->ports[port1 - 1]->dev, - "Could not disable after %d ms\n", total_time); - - return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); -} - static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) { struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *hdev = hub->hdev; int ret = 0; - if (port_dev->child && set_state) - usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); if (!hub->error) { - if (hub_is_superspeed(hub->hdev)) - ret = hub_usb3_port_disable(hub, port1); - else + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); + } } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); if (ret && ret != -ENODEV) dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); return ret; @@ -4036,6 +3984,26 @@ void usb_unlocked_enable_lpm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); +/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */ +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) +{ + struct usb_device *udev = port_dev->child; + int ret; + + if (udev && udev->port_is_suspended && udev->do_remote_wakeup) { + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U0); + if (!ret) { + msleep(USB_RESUME_TIMEOUT); + ret = usb_disable_remote_wakeup(udev); + } + if (ret) + dev_warn(&udev->dev, + "Port disable: can't disable remote wake\n"); + udev->do_remote_wakeup = 0; + } +} #else /* CONFIG_PM */ @@ -4043,6 +4011,9 @@ EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); #define hub_resume NULL #define hub_reset_resume NULL +static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) { } + int usb_disable_lpm(struct usb_device *udev) { return 0; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d2e50a27140c..24f9f98968a5 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a5e1b8b39ff5..1e51ded8607a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -259,11 +259,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - if (dwc->ep0_bounced && dep->number == 0) + if (dwc->ep0_bounced && dep->number <= 1) dwc->ep0_bounced = false; - else - usb_gadget_unmap_request(&dwc->gadget, &req->request, - req->direction); + + usb_gadget_unmap_request(&dwc->gadget, &req->request, + req->direction); dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 58b4657fc721..d17304ae0b42 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -143,7 +143,7 @@ int config_ep_by_speed(struct usb_gadget *g, ep_found: /* commit results */ - _ep->maxpacket = usb_endpoint_maxp(chosen_desc); + _ep->maxpacket = usb_endpoint_maxp(chosen_desc) & 0x7ff; _ep->desc = chosen_desc; _ep->comp_desc = NULL; _ep->maxburst = 0; @@ -1563,9 +1563,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min(w_length, (u16) 1); break; - /* function drivers must handle get/set altsetting; if there's - * no get() method, we know only altsetting zero works. - */ + /* function drivers must handle get/set altsetting */ case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; @@ -1574,7 +1572,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->set_alt) + + /* + * If there's no get_alt() method, we know only altsetting zero + * works. There is no need to check if set_alt() is not NULL + * as we check this in usb_add_function(). + */ + if (w_value && !f->get_alt) break; value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index db9433eed2cc..71c7d1db784f 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2079,6 +2079,8 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || h->interface >= ffs->interfaces_count) return -EINVAL; length = le32_to_cpu(d->dwSize); + if (len < length) + return -EINVAL; type = le32_to_cpu(d->dwPropertyDataType); if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) { @@ -2087,6 +2089,11 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, return -EINVAL; } pnl = le16_to_cpu(d->wPropertyNameLength); + if (length < 14 + pnl) { + pr_vdebug("invalid os descriptor length: %d pnl:%d (descriptor %d)\n", + length, pnl, type); + return -EINVAL; + } pdl = le32_to_cpu(*(u32 *)((u8 *)data + 10 + pnl)); if (length != 14 + pnl + pdl) { pr_vdebug("invalid os descriptor length: %d pnl:%d pdl:%d (descriptor %d)\n", @@ -2171,6 +2178,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, } } if (flags & (1 << i)) { + if (len < 4) { + goto error; + } os_descs_count = get_unaligned_le32(data); data += 4; len -= 4; @@ -2243,7 +2253,8 @@ static int __ffs_data_got_strings(struct ffs_data *ffs, ENTER(); - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || + if (unlikely(len < 16 || + get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || get_unaligned_le32(data + 4) != len)) goto error; str_count = get_unaligned_le32(data + 8); diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index f1fd777ef4ec..82e63f73bfd5 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -591,8 +591,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, /* throttle high/super speed IRQ rate back slightly */ if (gadget_is_dualspeed(dev->gadget)) - req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH || - dev->gadget->speed == USB_SPEED_SUPER) + req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH || + dev->gadget->speed == USB_SPEED_SUPER)) && + !list_empty(&dev->tx_reqs)) ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0) : 0; diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index bccc5788bb98..44e74fd3a80a 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1122,7 +1122,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* data and/or status stage for control request */ } else if (dev->state == STATE_DEV_SETUP) { - /* IN DATA+STATUS caller makes len <= wLength */ + len = min_t(size_t, len, dev->setup_wLength); if (dev->setup_in) { retval = setup_req (dev->gadget->ep0, dev->req, len); if (retval == 0) { @@ -1752,10 +1752,12 @@ static struct usb_gadget_driver probe_driver = { * such as configuration notifications. */ -static int is_valid_config (struct usb_config_descriptor *config) +static int is_valid_config(struct usb_config_descriptor *config, + unsigned int total) { return config->bDescriptorType == USB_DT_CONFIG && config->bLength == USB_DT_CONFIG_SIZE + && total >= USB_DT_CONFIG_SIZE && config->bConfigurationValue != 0 && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0 && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0; @@ -1780,7 +1782,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) } spin_unlock_irq(&dev->lock); - if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) + if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) || + (len > PAGE_SIZE * 4)) return -EINVAL; /* we might need to change message format someday */ @@ -1804,7 +1807,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* full or low speed config */ dev->config = (void *) kbuf; total = le16_to_cpu(dev->config->wTotalLength); - if (!is_valid_config (dev->config) || total >= length) + if (!is_valid_config(dev->config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; @@ -1813,10 +1817,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (kbuf [1] == USB_DT_CONFIG) { dev->hs_config = (void *) kbuf; total = le16_to_cpu(dev->hs_config->wTotalLength); - if (!is_valid_config (dev->hs_config) || total >= length) + if (!is_valid_config(dev->hs_config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; + } else { + dev->hs_config = NULL; } /* could support multiple configs, using another encoding! */ diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 181112c88f43..3300091e0e2a 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -266,7 +266,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep) /* caller must hold lock */ static void stop_activity(struct dummy *dum) { - struct dummy_ep *ep; + int i; /* prevent any more requests */ dum->address = 0; @@ -274,8 +274,8 @@ static void stop_activity(struct dummy *dum) /* The timer is left running so that outstanding URBs can fail */ /* nuke any pending requests first, so driver i/o is quiesced */ - list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list) - nuke(dum, ep); + for (i = 0; i < DUMMY_ENDPOINTS; ++i) + nuke(dum, &dum->ep[i]); /* driver now does any non-usb quiescing necessary */ } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 1dab9dfbca6a..c5de2e24c9e7 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -72,7 +72,7 @@ static const char hcd_name [] = "ohci_hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) -#define IO_WATCHDOG_DELAY msecs_to_jiffies(250) +#define IO_WATCHDOG_DELAY msecs_to_jiffies(275) #include "ohci.h" #include "pci-quirks.h" diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 940304c33224..02260cfdedb1 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -129,6 +129,10 @@ static int uhci_pci_init(struct usb_hcd *hcd) if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP) uhci->wait_for_hp = 1; + /* Intel controllers use non-PME wakeup signalling */ + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL) + device_set_run_wake(uhci_dev(uhci), 1); + /* Set up pointers to PCI-specific functions */ uhci->reset_hc = uhci_pci_reset_hc; uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index cc1993c5556e..2dd322e92951 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -619,8 +619,30 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; - if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { int time_left; xhci_dbg(xhci, "Resume USB2 port %d\n", @@ -661,13 +683,24 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } else { /* * The resume has been signaling for less than - * 20ms. Report the port status as SUSPEND, - * let the usbcore check port status again - * and clear resume signaling later. + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. */ status |= USB_PORT_STAT_SUSPEND; } } + /* + * Clear stale usb2 resume signalling variables in case port changed + * state during resume signalling. For example on error + */ + if ((bus_state->resume_done[wIndex] || + test_bit(wIndex, &bus_state->resuming_ports)) && + (raw_port_status & PORT_PLS_MASK) != XDEV_U3 && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) { + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + } if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && (raw_port_status & PORT_POWER) && (bus_state->suspended_ports & (1 << wIndex))) { @@ -998,6 +1031,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if ((temp & PORT_PE) == 0) goto error; + set_bit(wIndex, &bus_state->resuming_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); @@ -1005,6 +1039,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, spin_lock_irqsave(&xhci->lock, flags); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); + clear_bit(wIndex, &bus_state->resuming_ports); } bus_state->port_c_suspend |= 1 << wIndex; @@ -1189,6 +1224,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return 0; } +/* + * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3. + * warm reset a USB3 device stuck in polling or compliance mode after resume. + * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 + */ +static bool xhci_port_missing_cas_quirk(int port_index, + __le32 __iomem **port_array) +{ + u32 portsc; + + portsc = readl(port_array[port_index]); + + /* if any of these are set we are not stuck */ + if (portsc & (PORT_CONNECT | PORT_CAS)) + return false; + + if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) && + ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE)) + return false; + + /* clear wakeup/change bits, and do a warm port reset */ + portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + portsc |= PORT_WR; + writel(portsc, port_array[port_index]); + /* flush write */ + readl(port_array[port_index]); + return true; +} + int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -1223,6 +1287,14 @@ int xhci_bus_resume(struct usb_hcd *hcd) int slot_id; temp = readl(port_array[port_index]); + + /* warm reset CAS limited ports stuck in polling/compliance */ + if ((xhci->quirks & XHCI_MISSING_CAS) && + (hcd->speed >= HCD_USB3) && + xhci_port_missing_cas_quirk(port_index, port_array)) { + xhci_dbg(xhci, "reset stuck port %d\n", port_index); + continue; + } if (DEV_SUPERSPEED(temp)) temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); else diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 5ab70afd5624..bd06e3a907fa 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -964,6 +964,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) xhci->devs[slot_id] = NULL; } +/* + * Free a virt_device structure. + * If the virt_device added a tt_info (a hub) and has children pointing to + * that tt_info, then free the child first. Recursive. + * We can't rely on udev at this point to find child-parent relationships. + */ +void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *vdev; + struct list_head *tt_list_head; + struct xhci_tt_bw_info *tt_info, *next; + int i; + + vdev = xhci->devs[slot_id]; + if (!vdev) + return; + + tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts); + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* is this a hub device that added a tt_info to the tts list */ + if (tt_info->slot_id == slot_id) { + /* are any devices using this tt_info? */ + for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + vdev = xhci->devs[i]; + if (vdev && (vdev->tt_info == tt_info)) + xhci_free_virt_devices_depth_first( + xhci, i); + } + } + } + /* we are now at a leaf device */ + xhci_free_virt_device(xhci, slot_id); +} + int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags) { @@ -1825,8 +1859,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } - for (i = 1; i < MAX_HC_SLOTS; ++i) - xhci_free_virt_device(xhci, i); + for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--) + xhci_free_virt_devices_depth_first(xhci, i); if (xhci->segment_pool) dma_pool_destroy(xhci->segment_pool); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 54caaf87c567..bb47ea2c9c39 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -45,11 +45,13 @@ #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 +#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 +#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 static const char hcd_name[] = "xhci_hcd"; @@ -147,7 +149,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { + (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) { xhci->quirks |= XHCI_SPURIOUS_REBOOT; xhci->quirks |= XHCI_SPURIOUS_WAKEUP; } @@ -156,13 +159,19 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { xhci->quirks |= XHCI_SSIC_PORT_UNUSED; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) + xhci->quirks |= XHCI_MISSING_CAS; + if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f7e917866e05..7c08c7175c01 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -846,13 +846,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Stop EP timer ran, but another timer marked " - "xHCI as DYING, exiting."); - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but no command pending, " @@ -899,7 +892,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Calling usb_hc_died()"); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + usb_hc_died(xhci_to_hcd(xhci)); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "xHCI host controller is dead."); } @@ -1264,41 +1257,54 @@ void xhci_handle_command_timeout(unsigned long data) bool second_timeout = false; xhci = (struct xhci_hcd *) data; - /* mark this command to be cancelled */ spin_lock_irqsave(&xhci->lock, flags); - if (xhci->current_cmd) { - if (xhci->current_cmd->status == COMP_CMD_ABORT) - second_timeout = true; - xhci->current_cmd->status = COMP_CMD_ABORT; + + /* + * If timeout work is pending, or current_cmd is NULL, it means we + * raced with command completion. Command is handled so just return. + */ + if (!xhci->current_cmd || timer_pending(&xhci->cmd_timer)) { + spin_unlock_irqrestore(&xhci->lock, flags); + return; } + /* mark this command to be cancelled */ + if (xhci->current_cmd->status == COMP_CMD_ABORT) + second_timeout = true; + xhci->current_cmd->status = COMP_CMD_ABORT; + /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Command timeout\n"); ret = xhci_abort_cmd_ring(xhci); if (unlikely(ret == -ESHUTDOWN)) { xhci_err(xhci, "Abort command ring failed\n"); xhci_cleanup_command_queue(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); + + return; } - return; + + goto time_out_completed; } /* command ring failed to restart, or host removed. Bail out */ if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) { - spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "command timed out twice, ring start fail?\n"); xhci_cleanup_command_queue(xhci); - return; + + goto time_out_completed; } /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); + +time_out_completed: spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -1357,8 +1363,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, */ if (cmd_comp_code == COMP_CMD_ABORT) { xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - if (cmd->status == COMP_CMD_ABORT) + if (cmd->status == COMP_CMD_ABORT) { + if (xhci->current_cmd == cmd) + xhci->current_cmd = NULL; goto event_handled; + } } cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); @@ -1420,6 +1429,8 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci->current_cmd = list_entry(cmd->cmd_list.next, struct xhci_command, cmd_list); mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + } else if (xhci->current_cmd == cmd) { + xhci->current_cmd = NULL; } event_handled: @@ -1601,7 +1612,8 @@ static void handle_port_status(struct xhci_hcd *xhci, */ bogus_port_status = true; goto cleanup; - } else { + } else if (!test_bit(faked_port_index, + &bus_state->resuming_ports)) { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 896b928f7412..8ae4f9f50b6f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1576,19 +1576,6 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_urb_free_priv(urb_priv); return ret; } - if ((xhci->xhc_state & XHCI_STATE_DYING) || - (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Ep 0x%x: URB %p to be canceled on " - "non-responsive xHCI host.", - urb->ep->desc.bEndpointAddress, urb); - /* Let the stop endpoint command watchdog timer (which set this - * state) finish cleaning up the endpoint TD lists. We must - * have caught it in the middle of dropping a lock and giving - * back an URB. - */ - goto done; - } ep_index = xhci_get_endpoint_index(&urb->ep->desc); ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c5d6963e9cbe..f33028642e31 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -286,6 +286,8 @@ struct xhci_op_regs { #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) #define XDEV_INACTIVE (0x6 << 5) +#define XDEV_POLLING (0x7 << 5) +#define XDEV_COMP_MODE (0xa << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ #define PORT_POWER (1 << 9) @@ -1573,6 +1575,7 @@ struct xhci_hcd { #define XHCI_PME_STUCK_QUIRK (1 << 20) #define XHCI_SSIC_PORT_UNUSED (1 << 22) #define XHCI_NO_64BIT_SUPPORT (1 << 23) +#define XHCI_MISSING_CAS (1 << 24) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 3877249a8b2d..4a1182354e98 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -205,6 +205,7 @@ struct musb_platform_ops { int (*adjust_channel_params)(struct dma_channel *channel, u16 packet_sz, u8 *mode, dma_addr_t *dma_addr, u32 *len); + void (*clear_ep_rxintr)(struct musb *musb, int epnum); }; /* @@ -590,4 +591,10 @@ static inline int musb_platform_exit(struct musb *musb) return musb->ops->exit(musb); } +static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum) +{ + if (musb->ops->clear_ep_rxintr) + musb->ops->clear_ep_rxintr(musb, epnum); +} + #endif /* __MUSB_CORE_H__ */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index dcac5e7f19e0..fad6d5b92df9 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -301,6 +301,17 @@ static void otg_timer(unsigned long _musb) spin_unlock_irqrestore(&musb->lock, flags); } +void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum) +{ + u32 epintr; + struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); + const struct dsps_musb_wrapper *wrp = glue->wrp; + + /* musb->lock might already been held */ + epintr = (1 << epnum) << wrp->rxep_shift; + musb_writel(musb->ctrl_base, wrp->epintr_status, epintr); +} + static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; @@ -647,6 +658,7 @@ static struct musb_platform_ops dsps_ops = { .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, .recover = dsps_musb_recover, + .clear_ep_rxintr = dsps_musb_clear_ep_rxintr, }; static u64 musb_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 06853d7c89fd..1d0c096c1b84 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2273,12 +2273,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) int is_in = usb_pipein(urb->pipe); int status = 0; u16 csr; + struct dma_channel *dma = NULL; musb_ep_select(regs, hw_end); if (is_dma_capable()) { - struct dma_channel *dma; - dma = is_in ? ep->rx_channel : ep->tx_channel; if (dma) { status = ep->musb->dma_controller->channel_abort(dma); @@ -2295,10 +2294,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) /* giveback saves bulk toggle */ csr = musb_h_flush_rxfifo(ep, 0); - /* REVISIT we still get an irq; should likely clear the - * endpoint's irq status here to avoid bogus irqs. - * clearing that status is platform-specific... - */ + /* clear the endpoint's irq status here to avoid bogus irqs */ + if (is_dma_capable() && dma) + musb_platform_clear_ep_rxintr(musb, ep->epnum); } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 9a705b15b3a1..cf274b8c63fe 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -277,9 +277,16 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + /* + * The driver should not clear the xxxSTS after the line of + * "call irq callback functions" because each "if" statement is + * possible to call the callback function for avoiding any side effects. + */ + if (irq_state.intsts0 & BRDY) + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); - usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); + if (irq_state.intsts0 & BEMP) + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index c73808f095bb..a9fb5838e717 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -99,6 +99,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request, r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, value, index, NULL, 0, DEFAULT_TIMEOUT); + if (r < 0) + dev_err(&dev->dev, "failed to send control message: %d\n", r); return r; } @@ -116,7 +118,20 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - return r; + if (r < bufsize) { + if (r >= 0) { + dev_err(&dev->dev, + "short control message received (%d < %u)\n", + r, bufsize); + r = -EIO; + } + + dev_err(&dev->dev, "failed to receive control message: %d\n", + r); + return r; + } + + return 0; } static int ch341_set_baudrate(struct usb_device *dev, @@ -158,9 +173,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control) static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; unsigned long flags; buffer = kmalloc(size, GFP_KERNEL); @@ -171,14 +186,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); out: kfree(buffer); return r; @@ -188,9 +198,9 @@ out: kfree(buffer); static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; buffer = kmalloc(size, GFP_KERNEL); if (!buffer) @@ -253,7 +263,6 @@ static int ch341_port_probe(struct usb_serial_port *port) spin_lock_init(&priv->lock); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(port->serial->dev, priv); if (r < 0) @@ -315,7 +324,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) r = ch341_configure(serial->dev, priv); if (r) - goto out; + return r; if (tty) ch341_set_termios(tty, port, NULL); @@ -325,12 +334,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - goto out; + return r; } r = usb_serial_generic_open(tty, port); + if (r) + goto err_kill_interrupt_urb; + + return 0; + +err_kill_interrupt_urb: + usb_kill_urb(port->interrupt_in_urb); -out: return r; + return r; } /* Old_termios contains the original termios settings and @@ -345,26 +361,25 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; - if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); + priv->baud_rate = baud_rate; ch341_set_baudrate(port->serial->dev, priv); - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_handshake(port->serial->dev, priv->line_control); - /* Unimplemented: * (cflag & CSIZE) : data bits [5, 8] * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ + + spin_lock_irqsave(&priv->lock, flags); + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + + ch341_set_handshake(port->serial->dev, priv->line_control); } static void ch341_break_ctl(struct tty_struct *tty, int break_state) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f49e859ac5ce..6d4d8b828971 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -844,7 +844,9 @@ static int cp210x_tiocmget(struct tty_struct *tty) unsigned int control; int result; - cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + result = cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + if (result) + return result; result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 2916dea3ede8..8948f375e75d 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -50,6 +50,7 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ +static int cyberjack_attach(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, + .attach = cyberjack_attach, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -100,6 +102,14 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; +static int cyberjack_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_out < serial->num_ports) + return -ENODEV; + + return 0; +} + static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c48c9d83d48..494167fe6a2c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -986,7 +986,8 @@ static const struct usb_device_id id_table_combined[] = { /* ekey Devices */ { USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) }, /* Infineon Devices */ - { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) }, /* GE Healthcare devices */ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) }, /* Active Research (Actisense) devices */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 48db84f25cc9..db1a9b3a5f38 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -626,8 +626,9 @@ /* * Infineon Technologies */ -#define INFINEON_VID 0x058b -#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ +#define INFINEON_VID 0x058b +#define INFINEON_TRIBOARD_TC1798_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ +#define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */ /* * Acton Research Corp. diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index db591d19d416..37d0e8cc7af6 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1044,6 +1044,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); count = status; + kfree(buffer); } /* we are done with this urb, so let the host driver diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 1947ea0e0988..b63a6c3899c5 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2761,6 +2761,11 @@ static int edge_startup(struct usb_serial *serial) EDGE_COMPATIBILITY_MASK1, EDGE_COMPATIBILITY_MASK2 }; + if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + dev = serial->dev; /* create our private serial structure */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ddbb8fe1046d..2ef757f35162 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2378,6 +2378,13 @@ static int edge_startup(struct usb_serial *serial) struct edgeport_serial *edge_serial; int status; + /* Make sure we have the required endpoints when in download mode. */ + if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) { + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) + return -ENODEV; + } + /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (!edge_serial) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 5ad4a0fb4b26..7ed7d33d6c10 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -68,6 +68,16 @@ struct iuu_private { u32 clk; }; +static int iuu_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports) + return -ENODEV; + + return 0; +} + static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; @@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, + .attach = iuu_attach, .port_probe = iuu_port_probe, .port_remove = iuu_port_remove, }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 4f7e072e4e00..930be98d59b3 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif +static int keyspan_pda_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int keyspan_pda_port_probe(struct usb_serial_port *port) { @@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, + .attach = keyspan_pda_attach, .port_probe = keyspan_pda_port_probe, .port_remove = keyspan_pda_port_remove, }; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index e020ad28a00c..28cd1d05ed58 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, status_buf, KLSI_STATUSBUF_LEN, 10000 ); - if (rc < 0) - dev_err(&port->dev, "Reading line status failed (error = %d)\n", - rc); - else { + if (rc != KLSI_STATUSBUF_LEN) { + dev_err(&port->dev, "reading line status failed: %d\n", rc); + if (rc >= 0) + rc = -EIO; + } else { status = get_unaligned_le16(status_buf); dev_info(&port->serial->dev->dev, "read status %x %x\n", @@ -296,7 +297,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) rc = usb_serial_generic_open(tty, port); if (rc) { retval = rc; - goto exit; + goto err_free_cfg; } rc = usb_control_msg(port->serial->dev, @@ -315,17 +316,32 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) dev_dbg(&port->dev, "%s - enabled reading\n", __func__); rc = klsi_105_get_line_state(port, &line_state); - if (rc >= 0) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_state = line_state; - spin_unlock_irqrestore(&priv->lock, flags); - dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); - retval = 0; - } else + if (rc < 0) { retval = rc; + goto err_disable_read; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->line_state = line_state; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, + line_state); + + return 0; -exit: +err_disable_read: + usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); + usb_serial_generic_close(port); +err_free_cfg: kfree(cfg); + return retval; } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 2363654cafc9..813035f51fe7 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -51,6 +51,7 @@ /* Function prototypes */ +static int kobil_attach(struct usb_serial *serial); static int kobil_port_probe(struct usb_serial_port *probe); static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, + .attach = kobil_attach, .port_probe = kobil_port_probe, .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, @@ -113,6 +115,16 @@ struct kobil_private { }; +static int kobil_attach(struct usb_serial *serial) +{ + if (serial->num_interrupt_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n"); + return -ENODEV; + } + + return 0; +} + static int kobil_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 4f70df33975a..3c0552df5e37 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -65,8 +65,6 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static struct usb_serial_driver moschip7720_2port_driver; - #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 @@ -962,25 +960,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) tty_port_tty_wakeup(&mos7720_port->port->port); } -/* - * mos77xx_probe - * this function installs the appropriate read interrupt endpoint callback - * depending on whether the device is a 7720 or 7715, thus avoiding costly - * run-time checks in the high-frequency callback routine itself. - */ -static int mos77xx_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - if (id->idProduct == MOSCHIP_DEVICE_ID_7715) - moschip7720_2port_driver.read_int_callback = - mos7715_interrupt_callback; - else - moschip7720_2port_driver.read_int_callback = - mos7720_interrupt_callback; - - return 0; -} - static int mos77xx_calc_num_ports(struct usb_serial *serial) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); @@ -1239,7 +1218,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } @@ -1897,6 +1876,11 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; + if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing bulk endpoints\n"); + return -ENODEV; + } + product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -1921,19 +1905,18 @@ static int mos7720_startup(struct usb_serial *serial) tmp->interrupt_in_endpointAddress; serial->port[1]->interrupt_in_urb = NULL; serial->port[1]->interrupt_in_buffer = NULL; + + if (serial->port[0]->interrupt_in_urb) { + struct urb *urb = serial->port[0]->interrupt_in_urb; + + urb->complete = mos7715_interrupt_callback; + } } /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - /* start the interrupt urb */ - ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); - if (ret_val) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", - __func__, ret_val); - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { ret_val = mos7715_parport_init(serial); @@ -1941,6 +1924,13 @@ static int mos7720_startup(struct usb_serial *serial) return ret_val; } #endif + /* start the interrupt urb */ + ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); + if (ret_val) { + dev_err(&dev->dev, "failed to submit interrupt urb: %d\n", + ret_val); + } + /* LSR For Port 1 */ read_mos_reg(serial, 0, LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); @@ -1950,6 +1940,8 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { + usb_kill_urb(serial->port[0]->interrupt_in_urb); + #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2032,7 +2024,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, - .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, .port_probe = mos7720_port_probe, @@ -2046,7 +2037,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, - .read_int_callback = NULL /* dynamically assigned in probe() */ + .read_int_callback = mos7720_interrupt_callback, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index e4473a9109cf..d9f7b3bae09a 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1340,8 +1340,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } @@ -2116,6 +2116,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } +static int mos7840_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -2394,6 +2405,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmset = mos7840_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, + .attach = mos7840_attach, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6c6900bccf0..a180b17d2432 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -38,6 +38,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room(struct tty_struct *tty); static void omninet_disconnect(struct usb_serial *serial); +static int omninet_attach(struct usb_serial *serial); static int omninet_port_probe(struct usb_serial_port *port); static int omninet_port_remove(struct usb_serial_port *port); @@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_ports = 1, + .attach = omninet_attach, .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, .open = omninet_open, @@ -104,6 +106,17 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; +static int omninet_attach(struct usb_serial *serial) +{ + /* The second bulk-out endpoint is used for writing. */ + if (serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ca03fbfa2a32..cfa46e2a8482 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -271,6 +271,8 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_CC864_SINGLE 0x1006 #define TELIT_PRODUCT_DE910_DUAL 0x1010 #define TELIT_PRODUCT_UE910_V2 0x1012 +#define TELIT_PRODUCT_LE922_USBCFG1 0x1040 +#define TELIT_PRODUCT_LE922_USBCFG2 0x1041 #define TELIT_PRODUCT_LE922_USBCFG0 0x1042 #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 @@ -528,6 +530,12 @@ static void option_instat_callback(struct urb *urb); #define VIATELECOM_VENDOR_ID 0x15eb #define VIATELECOM_PRODUCT_CDS7 0x0001 +/* WeTelecom products */ +#define WETELECOM_VENDOR_ID 0x22de +#define WETELECOM_PRODUCT_WMD200 0x6801 +#define WETELECOM_PRODUCT_6802 0x6802 +#define WETELECOM_PRODUCT_WMD300 0x6803 + struct option_blacklist_info { /* bitmask of interface numbers blacklisted for send_setup */ const unsigned long sendsetup; @@ -1216,6 +1224,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1), + .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), @@ -1995,6 +2007,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ @@ -2003,6 +2016,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a4b88bc038b6..b8bf52bf7a94 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int oti6858_attach(struct usb_serial *serial); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, + .attach = oti6858_attach, .port_probe = oti6858_port_probe, .port_remove = oti6858_port_remove, }; @@ -324,6 +326,20 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } +static int oti6858_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int oti6858_port_probe(struct usb_serial_port *port) { struct oti6858_private *priv; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ae682e4eeaef..1db4b61bdf7b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -49,6 +49,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, @@ -220,9 +221,17 @@ static int pl2303_probe(struct usb_serial *serial, static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; + unsigned char num_ports = serial->num_ports; enum pl2303_type type = TYPE_01; unsigned char *buf; + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index e3b7af8adfb7..09d9be88209e 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -27,6 +27,7 @@ #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008 +#define ATEN_PRODUCT_ID2 0x2118 #define IODATA_VENDOR_ID 0x04bb #define IODATA_PRODUCT_ID 0x0a03 diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index f0a2ad15a992..e08ae0505ad2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -124,6 +124,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x81a6)}, /* Dell DW5570 QDL (MC8805) */ {USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */ {USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ {USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */ diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index b18974cbd995..a3ed07c58754 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port) { struct usb_serial *serial; struct qt2_port_private *port_priv; - unsigned long flags; int i; serial = port->serial; port_priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&port_priv->urb_lock, flags); usb_kill_urb(port_priv->write_urb); - port_priv->urb_in_use = false; - spin_unlock_irqrestore(&port_priv->urb_lock, flags); /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index ef0dbf0703c5..475e6c31b266 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial, return 0; } +static int spcp8x5_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int spcp8x5_port_probe(struct usb_serial_port *port) { const struct usb_device_id *id = usb_get_serial_data(port->serial); @@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = { .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .probe = spcp8x5_probe, + .attach = spcp8x5_attach, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 2694df2f4559..535fcfafc097 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -339,6 +339,13 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + status = -ENODEV; + goto free_tdev; + } + return 0; free_tdev: diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index a204782ae530..e98b6e57b703 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS); /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ - { USB_DEVICE(0x8087, 0x0716) } + { USB_DEVICE(0x8087, 0x0716) }, \ + { USB_DEVICE(0x8087, 0x0801) } DEVICE(flashloader, FLASHLOADER_IDS); /* Google Serial USB SubClass */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a0ca291bc07f..e7e29c797824 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1077,7 +1077,8 @@ static int usb_serial_probe(struct usb_interface *interface, serial->disconnected = 0; - usb_serial_console_init(serial->port[0]->minor); + if (num_ports > 0) + usb_serial_console_init(serial->port[0]->minor); exit: module_put(type->driver.owner); return 0; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 4095824c8c6d..2f40b6150fdc 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2124,6 +2124,13 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), +/* Reported-by George Cherian <george.cherian@cavium.com> */ +UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999, + "JMicron", + "JMS56x", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* * Patch by Constantin Baranov <const@tltsu.ru> * Report by Andreas Koenecke. |