diff options
| -rw-r--r-- | arch/arm/boot/dts/dm8168-evm.dts | 25 | ||||
| -rw-r--r-- | arch/arm/boot/dts/dm816x.dtsi | 34 |
2 files changed, 55 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 857d0289ad4d..d3a29c1b8417 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -35,6 +35,18 @@ DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ >; }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; }; &i2c1 { @@ -127,3 +139,16 @@ &mmc1 { vmmc-supply = <&vmmcsd_fixed>; }; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d98d0f7de380..3c97b5f2addc 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -97,10 +97,31 @@ /* Device Configuration Registers */ scm_conf: syscon@600 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x600 0x110>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; }; scrm_clocks: clocks { @@ -357,7 +378,10 @@ reg-names = "mc", "control"; interrupts = <18>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; @@ -366,13 +390,15 @@ usb1: usb@47401800 { compatible = "ti,musb-am33xx"; - status = "disabled"; reg = <0x47401c00 0x400 0x47401800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; |