summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2011-01-19ENGR00122167-4 V4L2 output: changes for TVE-VGA support.2.6.35-mx50evk-201011171130Jason Chen
2011-01-19ENGR00122167-3 MSL: add VGA support and fix TVE clock issue.Jason Chen
2011-01-19ENGR00122167-2 TVE-VGA: adding VGA support.Jason Chen
2011-01-19ENGR00122167-1 ipuv3: adding VGA support.Jason Chen
2011-01-19ENGR00133737 MXC SDMA: fix system hangs when play audio with irq threadedZeng Zhaoming
2011-01-19ENGR00133749: NAND: Remove the 2G limitation from NAND driverJason Liu
2011-01-19ENGR00133318-3 MX53 EVK:Set TVin pwr gpio to be output in io_initLiu Ying
2011-01-19ENGR00133318-2 MXC V4L2 capture:Correct TVin PAL/NTSC video formatsLiu Ying
2011-01-19ENGR00133318-1 IPUv3 CSI:Support SMFC channel interlaced scan orderLiu Ying
2011-01-19ENGR00133635 mc13892, fix pmic ADC issue and lost irq issueZhou Jingyu
2011-01-19ENGR00133345-2 V4L2 output:Support bottom field first videoLiu Ying
2011-01-19ENGR00133345-1 IPUv3 VDI:Support bottom field first settingLiu Ying
2011-01-19ENGR00133681 VPU:Fix kernel dump when VPU doesn't use IRAMLiu Ying
2011-01-19ENGR00133626 MX51: Enable battery charger on i.MX51 babbageNancy Chen
2011-01-19mtd: add init_size hook for NAND driverHuang Shijie
2011-01-19ENGR00133595 NAND : fix the wrong position for ONFI-nand's Block-mark swappingHuang Shijie
2011-01-19ENGR00133590 UART: let user control HW flow controlZhang Jiejing
2011-01-19ENGR00133580 PMIC: Configure battery driver as a moduleNancy Chen
2011-01-19ENGR00133380 FEC: Fix dhcp failure at i.MX28 EVKFrank Li
2011-01-19ENGR00133511 MX28: Fixed 1588 clock divider setting errorXie Xiaobo
2011-01-19ENGR00133377 mx28: fix system suspend twice issueZhou Jingyu
2011-01-19ENGR00133489 IMX USB-OTG:usb otg host mode wakeup may not workHu hui
2011-01-19ENGR00132954 - EPDC fb: SET_TEMPERATURE causes hangDanny Nold
2011-01-19ENGR00132537-3 - MSL: Add 6.0" V220 panel, update other E-Ink panelsDanny Nold
2011-01-19ENGR00132537-2 - Firmware: Added new 6.0" V220 waveform file, renamed othersDanny Nold
2011-01-19ENGR00132537-1 - EPDC fb/PxP: Support conversion from grayscale to monochromeDanny Nold
2011-01-19ENGR00133485 mx28: low speed device doesn't be supported at otg portPeter Chen
2011-01-19ENGR00133478-2 IMX USB:move clk_enable from irq context to thread contextHu hui
2011-01-19ENGR00133478-1 IMX USB:move clk_enable from irq context to thread contextHu hui
2011-01-19ENGR00133310 NAND : update the mtd->ecc_stats when reading page failedHuang Shijie
2011-01-19ENGR00133442 NAND : remove redundant clock operationsHuang Shijie
2011-01-19ENGR00133309 NAND : fix compile warnings for GPMIHuang Shijie
2011-01-19ENGR00133178-10 NAND : add ddr_clk for imx50Huang Shijie
2011-01-19ENGR00133178-9 NAND : add ONFI init codeHuang Shijie
2011-01-19ENGR00133178-8 NAND : add ONFI NAND commandsHuang Shijie
2011-01-19ENGR00133178-7 NAND : set proper ECC parameters for ONFI nandHuang Shijie
2011-01-19ENGR00133178-6 NAND : add extra_init() hook for ONFI nandHuang Shijie
2011-01-19ENGR00133178-5 NAND : add device info for ONFI nandHuang Shijie
2011-01-19ENGR00133178-4 NAND : add is_onfi_nand field for nand_device_info{}Huang Shijie
2011-01-19ENGR00133178-3 NAND : add ID infomation for ONFI nandHuang Shijie
2011-01-19ENGR00133178-2 DMA : remove mutex for each channelHuang Shijie
2011-01-19ENGR00133178-1 NAND : add set_parent()/set_rate() for GPMIHuang Shijie
2011-01-19ENGR00133440 mx23/mx28: add CONFIG_I2C_CHARDEV in defconfigAisheng.Dong
2011-01-19ENGR00133429 MX51 DVFS_PER: Set LP voltage to 1.25 VNancy Chen
2011-01-19ENGR00127010-2 mxs: change i2c device addressAisheng.Dong
2011-01-19ENGR00127010-1 mxs i2c: make i2c addr handling be compatible with i2c frameworkAisheng.Dong
2011-01-19ENGR00133268 MX28: DVFS support mDDRFrank Li
2011-01-19ENGR00133034 ipuv3: fix black flash issue during high resolution video playbackJason Chen
2011-01-19ENGR00131983-2 UBIBLOCK: Fix crash when run ubiattachFrank Li
2011-01-19ENGR00131983-1 MTD: Fix wrong check register_blkdev return valueFrank Li