summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/include
AgeCommit message (Expand)Author
2014-01-25apalis_imx6: introduce proper board fileMarcel Ziswiler
2013-09-09board-mx6_utc: initial additionTroy Kisky
2013-09-03Add support for DVI monitorsRobert Winkler
2013-09-03sdhci/sdhci-esdhc-imx: Allow platform-specific set_power callbackEric Nelson
2013-09-03mx6_h: add initial board fileTroy Kisky
2013-09-03msi: fix INT D, when msi is in use(not quite working)Troy Kisky
2013-09-03mx6_oc: initial addition of board filesEric Nelson
2013-09-03i.MX6: Add Nitrogen6X board and configsEric Nelson
2013-09-03pwm: add high_perf clock option, fix roundingTroy Kisky
2013-09-03Support BT656 and BT1120 output for iMX6 ipuv3.Qiang.li
2013-09-03mmc: esdhc: add caps flag to esdhc_platform_dataTroy Kisky
2013-09-03fix execute permissionsTroy Kisky
2013-08-08ENGR00273973-2 Revert "ENGR00270573-1 [MX6SL]Add support for dynamic Power GatiRobby Cai
2013-07-25ENGR00270573-1 [MX6SL]Add support for dynamic Power Gating of the display MIXRanjani Vaidyanathan
2013-07-12ENGR00262502-1 [MX6Q/MX6DLS]Add commandline option to route enet irq to gpioRanjani Vaidyanathan
2013-07-08ENGR00264701-1 Add new ioctl to lock VPU deviceHongzhang Yang
2013-07-08ENGR00269532 Correct @file comment in mxc_vpu.hHongzhang Yang
2013-06-27ENGR00238991-02 MX6 HDCP add IOCTL command defineSandor
2013-06-26ENGR00265476 MX6 SabreSD HDMI Compliance test 7-15 failedSandor
2013-05-22ENGR00263304-1 arm: IPUv3:Make ipu_enable_irq be able to return errorLiu Ying
2013-05-10ENGR00261451-2 mx6-msl: usb: using correct registerPeter Chen
2013-05-06ENGR00261398-01 MX6DL CEC PAD settingSandor
2013-04-22ENGR00259693 MX6DL/S-Enable routing of ENET interrupt to GPIORanjani Vaidyanathan
2013-04-15ENGR00257847-1 MX6Q/DL-Fix Ethernet performance issue when WAIT mode is activeRanjani Vaidyanathan
2013-04-09ENGR00257661 pcie: imx: pcie ep/rc validationRichard Zhu
2013-04-09ENGR00257658 Revert "ENGR00256893-1 MX6Q/DL-Fix Ethernet performance issueJason Liu
2013-04-03ENGR00256893-1 MX6Q/DL-Fix Ethernet performance issue when WAIT mode is activeRanjani Vaidyanathan
2013-04-03ENGR00256315-4 ARM: imx6: weim-nor: set proper PAD valueHuang Shijie
2013-03-15ENGR00253355 ARM: imx6q/imx6dl: Set proper PAD value for WEIM NORHuang Shijie
2013-03-12ENGR00169384 imx6q: uart: config and enble uart5Jianzheng Zhou
2013-03-01ENGR00252418 imx6: add fuse check for available devicesDong Aisheng
2013-02-05ENGR00243106 imx: pcie: enable pcie msi on imx6 platformsRichard Zhu
2013-01-21ENGR00240740-2 ARM:IPUv3:Add an interface to disable IPU hsp clkLiu Ying
2013-01-18ENGR00240228: IPUv3: CSI: Correct enum definition of IPU_CSI_DATA_WIDTHSheng Nan
2012-12-11ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing
2012-11-19ENGR00233366-1 Anatop PFUZE: LDO bypass can be configed by cmdlineRobin Gong
2012-11-09ENGR00224109 - MX6 : FEC : optimize ENET_REF_CLK PAD configuration.Fugang Duan
2012-11-06ENGR00231773-7 DMA: add interface to trigger SDMA event pending bitChen Liangjun
2012-11-05ENGR00232327 MX6SL-Optimize board level suspend powerRanjani Vaidyanathan
2012-11-05ENGR00225875-1 i.MX6Q/Solo SabreAuto Infineon Bluetooth uart3 configIsrael Perez
2012-11-01ENGR00232087-1 MX6: Enable PU LDO gating.Hongzhang Yang
2012-10-29ENGR00230538-2: CAAM: Add Secure Memory and SNVS propertiesSteve Cornelius
2012-10-09ENGR00226392 MX6SL Bluetooth: Setup uart2 to enable bluetoothLionel Xu
2012-10-08ENGR00227249 MX6SL-Add support for low latency STANDBY mode.Ranjani Vaidyanathan
2012-10-08ENGR00227020: devices-common imx_dma_data duplicate struct definitionAdrian Alonso
2012-10-07ENGR00227250 MX6SL/MX6DL-Fix IRAM sizeRanjani Vaidyanathan
2012-09-29ENGR00225981-8 csi/imx6sl: add the platform-related settingRobby Cai
2012-09-27ENGR00223797-3 ARM:IPUv3 fb:Add late init in pdataLiu Ying
2012-09-27ENGR00223797-1 ARM:IPUv3:Add bypass reset in pdataLiu Ying
2012-09-26ENGR00225912 ARM: etm: Add trace buffer supportFrank Li
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-12 06:26:06 +0000