summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2013-08-15ENGR00275391 i.mx6d/q: disable the double linefill feature of PL310Jason Liu
2013-08-08ENGR00273973-2 Revert "ENGR00270573-1 [MX6SL]Add support for dynamic Power GatiRobby Cai
2013-08-08ENGR00274382 imx6q: fix can transceiver unwork on AI RevE baseboardDong Aisheng
2013-07-31ENGR00273044 imx6_defconfig: enable CONFIG_USB_EHCI_TT_NEWSCHEDPeter Chen
2013-07-25ENGR00272597 mx6-msl: usb: fix building warning when only build host driverrel_imx_3.0.35_4.1.0_rc1Peter Chen
2013-07-25ENGR00272135 msl-mx6: usb-h1: Fix the bug that using the wrong registerPeter Chen
2013-07-25ENGR00272022 msl-mx6: usb: wait PHY clock stable explicitlyPeter Chen
2013-07-25ENGR00271977-2 imx6{s}_defconfig: enable ARM_ERRATA_775420Jason Liu
2013-07-25ENGR00271977-1 imx6_defconfig: enable PL310_ERRATA_769419Jason Liu
2013-07-25ARM: 7541/1: Add ARM ERRATA 775420 workaroundSimon Horman
2013-07-25ENGR00270573-1 [MX6SL]Add support for dynamic Power Gating of the display MIXRanjani Vaidyanathan
2013-07-15ENGR00270697-1 MX6: correct fec MDC clock sourceFugang Duan
2013-07-12ENGR00262502-1 [MX6Q/MX6DLS]Add commandline option to route enet irq to gpioRanjani Vaidyanathan
2013-07-10ENGR00255733 MX6SL: Enable DISPLAY power gating only on TO1.2Robby Cai
2013-07-10ENGR00269827 mx6sl: lcdif: fix lcd timing settingRobby Cai
2013-07-10ENGR00270192 imx: pcie: toggle bit18 of grp1 fix pcie pm issue.Richard Zhu
2013-07-08ENGR00264701-1 Add new ioctl to lock VPU deviceHongzhang Yang
2013-07-08ENGR00269532 Correct @file comment in mxc_vpu.hHongzhang Yang
2013-07-05ENGR00269935 Fix the build breakMahesh Mahadevan
2013-07-05ENGR00269604 Fix the set clock-rate for audio & videoMahesh Mahadevan
2013-07-05ENGR00269616 mx6: Unexpected enter WAIT mode cause IPU underrunAnson Huang
2013-07-03ENGR00269449 mx6q/sdl clk:Correct register writing for aclk_podfLiu Ying
2013-06-28ENGR00269055 Fix build breakJay Monkman
2013-06-28ENGR00268893 mx6q/sdl clock:Correct emi_clk set/get rate in aclk_podfLiu Ying
2013-06-27ENGR00268864 Fix build breakJay Monkman
2013-06-27ENGR00238991-02 MX6 HDCP add IOCTL command defineSandor
2013-06-27ENGR00238991-01 MX6 SabreSD HDMI Adjust PHY configSandor
2013-06-26ENGR00267926 mx6: do not need to enable warm resetAnson Huang
2013-06-26ENGR00265476 MX6 SabreSD HDMI Compliance test 7-15 failedSandor
2013-06-25ENGR00268110 mx6: eim_clk div can't be used directlyAnson Huang
2013-06-21ENGR00268112 pcie: emaluate the pcie ep as ram device, configure the bar#Richard Zhu
2013-06-20ENGR00267089 mx6: Amend the definitions of ANADIG_ANA_MISC2_REGx_STEP_TIME_MASKPeter Chan
2013-06-19ENGR00262868 msl-mx6: usb: do not enable id wakeup interrupt for non-otgPeter Chen
2013-06-19ENGR00262528-1 mx6-msl: usb: the static variables needs to be initializedPeter Chen
2013-06-18ENGR00267442 mx6: clk: some clock settings are incorrectAnson Huang
2013-06-17ENGR00181680-1 No audio when play 3 streams after 3~10 seconds sometimesb02247
2013-06-14ENGR00267024 mx6q: Stop DMA memory fragmentationJay Monkman
2013-06-13ENGR00266312 mx6dl: add i2c4 bus support for sabresd/auto, arm2 platformsFugang Duan
2013-05-23ENGR00263639 MX6SL-Ensure Audio PLL (PLL4) is enabled correctlyRanjani Vaidyanathan
2013-05-23ENGR00263785 Update code to read GPIO signal valueMahesh Mahadevan
2013-05-22ENGR00263304-1 arm: IPUv3:Make ipu_enable_irq be able to return errorLiu Ying
2013-05-21ENGR00262815-1 MX6SL-Add support for SDMA buffers in IRAMRanjani Vaidyanathan
2013-05-20ENGR00262832 MX6SL-Lower Audio playback power.Ranjani Vaidyanathan
2013-05-15ENGR00262435 MX6x-Drain L1/L2 buffers before DDR enters self-refresh.Ranjani Vaidyanathan
2013-05-10ENGR00261451-3 mx6-msl: usb: add debounce time for otgsc valuePeter Chen
2013-05-10ENGR00261451-2 mx6-msl: usb: using correct registerPeter Chen
2013-05-06ENGR00261398-02 MX6DL: Enable CEC function for SabreSD boardSandor
2013-05-06ENGR00261398-01 MX6DL CEC PAD settingSandor
2013-04-24ENGR00260082 mx6sl_evk: Change wm8962's MCLK to 24MHzNicolin Chen
2013-04-24ENGR00258491-4 msl-mx6: usb: fix clock unmatch problem after unload modulePeter Chen